Jump to content

Fuel used are not processed correctly


PaintSplasher
 Share

Recommended Posts

Hey,

I am not sure if this a smartCARS2 issue or a phpvms 5.5 one. But I need a point where I can start to find a solution  I have set up everything to "feet", "nm" and "kilogramms".

If a pilot sent a pirep via smartCARS2, the fuel used are totally incorrect. Here some facts:

local.config.php of phpvms 5.5: As you can see below, we've all set to "kg".

Config::Set('MONEY_UNIT', '€');
Config::Set('WeightUnit', '0');   # 0=Kg 1=lbs
Config::Set('DistanceUnit', '2');   # 0=KM 1= Miles 2=NMiles
Config::Set('SpeedUnit', '1');   # 0=Km/H 1=Kts
Config::Set('AltUnit', '1');   # 0=Meter 1=Feet 
Config::Set('LiquidUnit', '2');   # 0=liter 1=gal 2=kg 3=lbs
Config::Set('WelcomeMessage', 'Virtual Cargo International - ACARS'); # Welcome Message
Config::Set('FUEL_DEFAULT_PRICE', 0.63);

Our smartCARS2 is also set to "kg":

smartcars2.png

Here an actually flight(PIREP) that was sent by one of our pilots:

smartCARS version 2.1.31.0, 2018-10-2 UTC
[08:37:23] Preflight started, flying offline
[08:37:23] Flying PMDG 747-46NERF AirBridgeCargo Airlines VP-BIG
[08:59:46] Flaps set to position 3
[08:59:55] Pushing back with 65905 kg of fuel
[08:59:58] Engine 3 is on
[08:59:58] Engine 4 is on
[09:01:20] Engine 1 is on
[09:01:20] Engine 2 is on
[09:03:11] Taxiing to runway
[09:08:00] Taking off
[09:08:25] Climbing, pitch: 11, roll: level, 165 kts
[09:08:33] Gear lever raised at 273 ft at 183 kts
[09:08:53] Flaps set to position 2 at 1329 ft at 189 kts
[09:09:07] Flaps set to position 1 at 2002 ft at 198 kts
[09:09:22] Flaps set to position 0 at 2522 ft at 218 kts
[09:19:51] Sim paused
[09:20:30] Sim unpaused
[09:21:59] Cruising at 33000ft, pitch: 2, 513 kts
[09:52:18] Simulator connection reestablished, 3 from before
[09:52:45] Sim paused
[09:52:46] Sim unpaused
[12:48:41] Descending
[13:10:37] Approaching
[13:14:14] Flaps set to position 1 at 3449 ft at 231 kts
[13:16:19] Flaps set to position 2 at 2521 ft at 207 kts
[13:16:32] Flaps set to position 3 at 2422 ft at 191 kts
[13:17:58] Flaps set to position 4 at 2161 ft at 178 kts
[13:17:59] Gear lever lowered at 2158 ft at 177 kts
[13:19:14] Flaps set to position 5 at 1926 ft at 163 kts
[13:19:21] Final approach, 157 kts
[13:20:18] Flaps set to position 6 at 1763 ft at 158 kts
[13:23:04] Touched down at -89 fpm, gear lever: down, pitch: 2, roll: 2 degrees left, 136 kts
[13:23:38] Landed in 4344 ft, fuel: 17324 kg, weight: 256913 kg
[13:23:38] Taxiing to gate
[13:23:53] The flight may now be ended
[13:23:53] Taxi time was less than 15 seconds
[13:23:53] Arrived, flight duration: 04:07

And now how the PIREP come into our system:

fuel.png

 

As you can notice, from pushback to the landing phase he burned 48581kg of fuel.

At the admin center fuel used shows us 107122kg.

And with a little bit of math, the 107122 are lbs not kg. (107122 * 0,453592 = 48589)

Why the fuel used comes still in lbs, although anything is setup to kg? Thank you in advance

Link to comment
Share on other sites

  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...