Jump to content

Actual Departure time


selwynorren

Recommended Posts

Well, lets start off by saying that your kACARS is the best. It just works right out of the blocks. Thank you very much!! :D

I was wondering about the possibility of the actual departure time being read from the sim and not from the system. Most of the flight we fly are normal daytime flights, but are flown in the evenings, or wee hours of the morning, but we set the departure time to a few minutes before the scheduled time to depart, this way we can monitor if the pilot did fly the flight at the correct times or not.

Example of a flight that takes place at 15:00 UTC teh sim time was set for 14:50 UTC but the log shows as follows

[21:55] - Cessna Skyhawk 172SP Paint4

[21:55] - Flight Number OCC014

[21:55] - Departure FAPS

[21:55] - Destination FAGC

[21:55] - Boarding

[21:58] - Taxiing to Runway

[21:59] - Taking Off

[21:59] - Taking Off

[21:59] - 61kts

[21:59] - pitch angle -9 degrees

[21:59] - 161 (lbs) of fuel onboard

[22:00] - Climbing

[22:04] - TOC Reached

[22:04] - Cruise

[22:34] - Simulator Paused

[22:34] - Simulator Un-Paused

[22:34] - Simulator Paused

[22:35] - Simulator Un-Paused

[22:40] - Simulator Paused

[22:40] - Simulator Un-Paused

[22:41] - Simulator Paused

[22:41] - Simulator Un-Paused

[22:41] - Simulator Paused

[22:42] - Simulator Un-Paused

[22:49] - Landing Rate -109fpm

[22:49] - 124 (lbs) of fuel onboard

[22:49] - pitch angle -10 degrees

[22:54] - Max Sim Rate: 1x

[22:54] - kACARS_Free Version 1.0.0.7

Again thanks for a brilliant products. Whole heartedly supported by orrenCharters (Hopefully soon we will purchase your custom kACARS as well

  • Like 1
Link to comment
Share on other sites

I think it should be server side as then all PIREPs that come in would follow the same format. It would in theory be easier for the management of the VA that way.

Perhaps though you could develop both and allow each VA to choose which one they implement.

Link to comment
Share on other sites

  • 2 years later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...