Jump to content

<p>Configuration Options</p>

  • The core/app.config.php file contains many options, to customize your system. To make these changes, copy the line from your app.config.php file, to the core/local.config.php file. The local file is not touched during any updates, except to add new options.

    How to apply settings

    The appropriate line is in the app.config.php file - it will look like:


    Just copy the line into your local.config file. The app.config if first loaded, and then the local.config is loaded after it, so any changes made in the local.config file are used since it's loaded last.

    All of the settings available are not listed here - look through the app.config.php file - they are there, along with the descriptions.

    Available Settings


    This is the page encoding to use for the site. Internationalized sites may use UTF-8.


    This is the extension of pages. Leave as .htm, unless you know what you're doing.


    The system starts with an ID of 1. You can start it from 1001, or 5001. This won't change the ID in the database, just the appearance.


    This is the length of the ID. Default is 4, so a number will show as 0001. The length includes the ID number.


    Config::Set('LOAD_FACTOR', '72');

    This setting determines the % of MAXLOAD which are on a flight. The system will generate a passenger/cargo load based off of this number. The industry load factor at this time is 72% (according to ATA). Can be adjusted, not more than 90%. phpVMS will decide between +/- 10% of LOAD_FACTOR


    Config::Set('UNITS', 'nm'); 

    Enter nm (nautical miles), mi (miles), or km (kilometers). This will affect distance calculations


    Config::Set('CARGO_UNITS', 'lbs');

    This is your units for cargo flights - lbs/kg/newtons. This is just the text which is displayed


    Config::Set('MONEY_UNIT', ' ); 

    This is the unit of money. For non-dollars, use : Euro (€), enter ”€” Yen (Â¥), enter ”¥â€ Pounds (£), enter ”£â€ For example:

    Config::Set('MONEY_UNIT', '€'); // For Euro


    This is if your aircraft do not have a default set. There is a penalty if these values end up being used

    Config::Set('DEFAULT_MAX_CARGO_LOAD', 10000);


    This is if your aircraft don't have a passenger load set. There is a penalty if this is used.

    Config::Set('DEFAULT_MAX_PAX_LOAD', 250);


    Whether to automatically retire a pilot. True/false value. The next setting is for how many days. Inactivity = no PIREP filings.

    Config::Set('PILOT_AUTO_RETIRE', true);


    After how much time, in days, to mark a pilot retired.

    Config::Set('PILOT_INACTIVE_TIME', 90);


    Whether to automatically confirm pilots, or require admin approval. Default is fault

    Config::Set('PILOT_AUTO_CONFIRM', false);


    After submitting a PIREP, a pilot can edit their PIREP, but only the custom fields. This is the time, in hours, they're allowed to do that.

    Config::Set('PIREP_CUSTOM_FIELD_EDIT', '48');


    What to order schedules by. Use s.[column_name] [ASC/DESC], with the column name being from the schedules table

    Config::Set('SCHEDULES_ORDER_BY', 's.flightnum ASC');


    For PIREPS_ORDER_BY use p.[column_name] [ASC/DESC]

    Config::Set('PIREPS_ORDER_BY', 'p.submitdate DESC');


    If someone places a bid on a route, if that route is shown or not

    Config::Set('DISABLE_SCHED_ON_BID', true);


    If the above is false, this won't allow bids on a flight which has already been bid on

    Config::Set('DISABLE_BIDS_ON_BID', false);


    If you want to count transfer hours in rank calculations

    Config::Set('TRANSFER_HOURS_IN_RANKS', false);


    The StatsData::UserOnline() function - how many minutes to check

    Config::Set('USERS_ONLINE_TIME', 20);


    0=Kg 1=lbs

    Config::Set('WeightUnit', '1'); 


    0=KM 1= Miles 2=NMiles

    Config::Set('DistanceUnit', '2'); 


    0=Km/H 1=Kts

    Config::Set('SpeedUnit', '1');


    0=Meter 1=Feet

    Config::Set('AltUnit', '1');


    0=liter 1=gal 2=kg 3=lbs

    Config::Set('LiquidUnit', '3'); 


    For FSPassengers

    Config::Set('WelcomeMessage', 'phpVMS/FSPAX ACARS');

    FSFK FTP Settings

    Your FTP Server, and path to the lib/images folder (from where the FTP connects from), IE

    ftp://phpvms.net/phpvms/lib/fsfk or ftp://phpvms.net/pub...phpvms/lib/fsfk

    You want the path from when you connect to the FTP down to where the /lib/fsfk folder is

    Config::Set('FSFK_FTP_SERVER', '');
    Config::Set('FSFK_FTP_PORT', '21');
    Config::Set('FSFK_FTP_USER', '');
    Config::Set('FSFK_FTP_PASS', '');
    Config::Set('FSFK_FTP_PASSIVE_MODE', 'TRUE');
    Config::Set('FSFK_IMAGE_PATH', '/lib/fsfk'); // web path from SITE_ROOT

    Signature Settings

    Settings for the signatures which are generated for pilots.

    Config::Set('SIGNATURE_TEXT_COLOR', '#000');
    Config::Set('SIGNATURE_SHOW_EARNINGS', true);
    Config::Set('SIGNATURE_SHOW_RANK_IMAGE', true);
    Config::Set('SIGNATURE_SHOW_COPYRIGHT', true);

    Email Settings

    Config::Set('EMAIL_FROM_NAME', '');
    Config::Set('EMAIL_FROM_ADDRESS', ''); Config::Set('EMAIL_USE_SMTP', false);
    # Add multiple SMTP servers by separating them with ;
    Config::Set('EMAIL_SMTP_SERVERS', '');
    Config::Set('EMAIL_SMTP_PORT', '25');
    Config::Set('EMAIL_SMTP_USE_AUTH', false);
    Config::Set('EMAIL_SMTP_USER', '');
    Config::Set('EMAIL_SMTP_PASS', ''); 

User Feedback

Recommended Comments

There are no comments to display.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Add a comment...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...