Steve Bartlett Posted May 3, 2011 Report Share Posted May 3, 2011 What aircraft types does phpvms want? I have edited my aircraft for over 3000 routes twice now and still I get "aircraft XXXX does not exist". I was told I could up load the routes via CSV or is this wrong and I have to upload them 1 by 1 via "Flight Schedules and Routes"? Quote Link to comment Share on other sites More sharing options...
Guest lorathon Posted May 3, 2011 Report Share Posted May 3, 2011 see below. This is straight from the Import Schedules Page Instructions - You can import your flight plans from CSV. You can download a template CSV from here. The following must be done: 1. The airline code must be added, or import will fail 2. You can leave out the header, but if it is there, check off the box 3. All of the columns can be there, but only the route, leg, distance, and flighttime can be blank 4. Routes which already exist (based on the code and flight number) will not be re-added 5. Aircraft must be added by registration 6. Flight Type can be "P" (Passenger), "C" (Cargo) or "H" (Charter). Enter it without quotes 7. Days of week - last column - enter 0-6 for Sunday (0) to Saturday (6): ie: Monday, Wed, Fri, Sat flights will be: 1356 as the value 8. Enabled column - 1 for enabled, 0 for disabled. Blank defaults to enabled 9. Remove the leg column - legs are no longer counted, so please remove that column Quote Link to comment Share on other sites More sharing options...
Steve Bartlett Posted May 3, 2011 Author Report Share Posted May 3, 2011 Ok so it is not B777 is NXXXUA? XXX being numbers? Quote Link to comment Share on other sites More sharing options...
Steve Bartlett Posted May 3, 2011 Author Report Share Posted May 3, 2011 Ok that worked, now I have to change them ALL again, LOL Thank you for the Info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.