maxwaldorf Posted January 4, 2009 Report Share Posted January 4, 2009 Hi again, As written in the fsacars notice, the error message might show up (which did in my case) but PIREP is sent to system... The only issue with that is : Fsacars thinks the flight log is still not sent and so, at next flight it will send again and again the previous flight... Is this because fsacars does not receive a "OK" from the website ? I am willing to help you on that subject to identify the bug... Thanks for the help ! ;D Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 4, 2009 Administrators Report Share Posted January 4, 2009 It does see the OK message (I'm assuming), I send out an OK either way. I don't always get the error. I can't really ask the FSACARS people either about it, since they seemingly closed shop. It usually shows up when you click "Send Log", but when you accept the PIREP, it should send the PIREP right then. I haven't had the time to really diagnose it in too much detail. Quote Link to comment Share on other sites More sharing options...
Wayne Posted January 4, 2009 Report Share Posted January 4, 2009 I also notice when they get sent in with fsacars on the website under the pilots page if you click on a pilot it doesn't show a prep at the bottom as if you were to fill one out on the website. I didn't know if this is in the matter of being fixed but i just thought i would let you know. Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 4, 2009 Administrators Report Share Posted January 4, 2009 I also notice when they get sent in with fsacars on the website under the pilots page if you click on a pilot it doesn't show a prep at the bottom as if you were to fill one out on the website. I didn't know if this is in the matter of being fixed but i just thought i would let you know. Do you see it in the admin panel, under that pilot? Quote Link to comment Share on other sites More sharing options...
Wayne Posted January 4, 2009 Report Share Posted January 4, 2009 If i click on the All Pilots link it brings up all pilots and shows he has one flight all good. But if i click on his name it shows his info....all good...but under PIREPs List it dosent show anything even tho he submitted a Pirep through FSACARS..lol Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 4, 2009 Author Report Share Posted January 4, 2009 It does see the OK message (I'm assuming), I send out an OK either way. I don't always get the error. I always get the error but by activating the log, I see that not all the info show up well... If you wish to get further wish the log just mail me ! ;-) Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 4, 2009 Administrators Report Share Posted January 4, 2009 You can post your log file from the engine, just in app.config.php, set ACARS_DEBUG to true (if the entry is in your local.config, set it there), then just attach the /core/modules/acars/log.txt file in a post here, and I'll take a look Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 4, 2009 Author Report Share Posted January 4, 2009 Well the log shows up that : pilot=XLRXLR0003&date=2009/01/04&time=23:22:00&callsign=®=F-TACB&origin=LFLL&dest=LFLY&alt=&equipment=A321&fuel=00&duration=00:01&distance=00&version=4015&more=0&log=[2009/01/04%2023:22:00]*Flight%20IATA:XLR1*Pilot%20Number:XLR0003*Company%20ICAO:XLR*Aircraft%20Type:A321*Aircraft%20Registration:F-TACB*Departing%20Airport:%20LFLL*Destination%20Airport:%20LFLY*Online:%20No*Route:DCT*Flight%20Level:050*23:22%20%20Zero%20fuel%20Weight:%20542%20Lbs,%20Fuel%20Weight:%2057%20Lbs*23:22%20%20Parking%20Brakes%20off*23:22%20%20Com1%20Freq=128.30*23:22%20%20VR=%20047%20Knots*23:22%20%20V2=%20045%20Knots*23:22%20%20Take-off*23:22%20%20Take%20off%20Weight:%20599%20Lbs*23:22%20%20Wind:%20000?%20@%20000%20Knots%20Heading:%20026?*23:22%20%20POS%20N45?%2043?%2012??%20E005?%2004?%2045??%20*23:22%20%20N11%2073%20N12%2000*23:22%20%20TOC*23:22%20%20Fuel%20Weight:%2059%20Lb*23:23%20%20Land*23:23%20%20Wind:000?@000%20Knots*23:23%20%20Heading:%20357?*23:23%20%20Flight%20Duration:%2000:01%20*23:23%20%20Landing%20Weight:%20599%20Lbs*23:23%20%20POS%20N45?%2043?%2050??%20E005?%2004?%2055??%20*23:23%20%20Parking%20brakes%20on*23:23%20%20Block%20to%20Block%20Duration:%2000:01%20*23:23%20%20Final%20Fuel:%2057%20Lbls*23:23%20%20Spent%20Fuel:%2000%20Lbls*23:23%20%20Flight%20Length:%2000%20NM*23:23%20%20TOD%20Land%20Length:%2000%20NM* PIREP FILE Array ( [pilot] => XLRXLR0003 [date] => 2009/01/04 [time] => 23:22:00 [callsign] => [reg] => F-TACB [origin] => LFLL [dest] => LFLY [alt] => [equipment] => A321 [fuel] => 00 [duration] => 00:01 [distance] => 00 [version] => 4015 [more] => 0 [log] => [2009/01/04 23:22:00]*Flight IATA:XLR1*Pilot Number:XLR0003*Company ICAO:XLR*Aircraft Type:A321*Aircraft Registration:F-TACB*Departing Airport: LFLL*Destination Airport: LFLY*Online: No*Route:DCT*Flight Level:050*23:22 Zero fuel Weight: 542 Lbs, Fuel Weight: 57 Lbs*23:22 Parking Brakes off*23:22 Com1 Freq=128.30*23:22 VR= 047 Knots*23:22 V2= 045 Knots*23:22 Take-off*23:22 Take off Weight: 599 Lbs*23:22 Wind: 000? @ 000 Knots Heading: 026?*23:22 POS N45? 43? 12?? E005? 04? 45?? *23:22 N11 73 N12 00*23:22 TOC*23:22 Fuel Weight: 59 Lb*23:23 Land*23:23 Wind:000?@000 Knots*23:23 Heading: 357?*23:23 Flight Duration: 00:01 *23:23 Landing Weight: 599 Lbs*23:23 POS N45? 43? 50?? E005? 04? 55?? *23:23 Parking brakes on*23:23 Block to Block Duration: 00:01 *23:23 Final Fuel: 57 Lbls*23:23 Spent Fuel: 00 Lbls*23:23 Flight Length: 00 NM*23:23 TOD Land Length: 00 NM* [module] => ACARS => fsacars [id] => pirep [redir] => pirep [icao] => [pilotid] => pirep [action] => pirep [request] => fsacars ) Array The problem seems to be coming from fsacars soft itself as the log received something... But is there a way to enable a debug mode for this software (the fact that I am under vista will not help either...) Cheers ! Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 Your PilotID is doubling - in youre config file, set CompanyICAO to blank (CompanyICAO=) As for debug mode, I haven't found a way. I use that log to debug as well. What you can do is, the top line: pilot=XLRXLR0003&date=2009/01/04&time=23:22:00&callsign=®=F-TACB&origin=LFLL... Put it in your URL as: yoursite.com/action.php/acars/fsacars/pirep/?pilot=XLRXLR0003&date=2009/01/04&time=23:22:00&callsign=®=F-TACB&origin=LFLL... And you can see the system response (should be "OK") Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 The fsacars INI template build the pilot name like that and if I remove the XLR before the numbers, the google maps does not recognize the pilot ! Ok I checked, As you said, response is OK with all the array stuff... Anyway, I looked into the original send_pirep.php provided by fsacars team... As I am a total dumb at coding, is there a difference between : RETURN "OK" (in Original fsacars file) and echo "OK" (in phpvms files) Cheers ! Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 OK, I found out what was messing with FSACARS !!! It seems that you added an output in your log with the result ARRAY... (apache server seems to output this as a single line which might contribute to the error also) Here is the server result on submit : (one long single line) Array ( [pilotid] => 0003 [code] => XLR [flightnum] => 1 [leg] => [depicao] => LFLL [arricao] => LFLY [aircraft] => 1 [flighttime] => 00.01 [submitdate] => NOW() [comment] => [log] => [2009/01/04 23:22:00]*Flight IATA:XLR1*Pilot Number:XLR0003*Company ICAO:XLR*Aircraft Type:A321*Aircraft Registration:F-TACB*Departing Airport: LFLL*Destination Airport: LFLY*Online: No*Route:DCT*Flight Level:050*23:22 Zero fuel Weight: 542 Lbs, Fuel Weight: 57 Lbs*23:22 Parking Brakes off*23:22 Com1 Freq=128.30*23:22 VR= 047 Knots*23:22 V2= 045 Knots*23:22 Take-off*23:22 Take off Weight: 599 Lbs*23:22 Wind: 000? @ 000 Knots Heading: 026?*23:22 POS N45? 43? 12?? E005? 04? 45?? *23:22 N11 73 N12 00*23:22 TOC*23:22 Fuel Weight: 59 Lb*23:23 Land*23:23 Wind:000?@000 Knots*23:23 Heading: 357?*23:23 Flight Duration: 00:01 *23:23 Landing Weight: 599 Lbs*23:23 POS N45? 43? 50?? E005? 04? 55?? *23:23 Parking brakes on*23:23 Block to Block Duration: 00:01 *23:23 Final Fuel: 57 Lbls*23:23 Spent Fuel: 00 Lbls*23:23 Flight Length: 00 NM*23:23 TOD Land Length: 00 NM* ) OK fsacars software seems to be reluctant to that piece of information by simply removing (or commenting) the following line, the issue wanished ! Here the "work around" in fscars.php in /core/modules/ACARS/ : Just search and comment it out or remove it : print_r($data); (you can find it at the end of the file) I've been working hours to understand why this was not working and finally ! I will continue testing it and give you feedback... Cheers ! [/code] Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 Doh! writedebug($data); print_r($data); Didn't remove the print_r()... heh. I changed that on my side so it'll be corrected... Thanks! I end up leaving something, funny thing is, the writedebug() was so I didn't have to do print_r(). Sorry about that... Also, don't remove the XLR before the numbers in the pilot ID, just remove it from the CompanyICAO. It's the way I need the complete ID and code of the pilot, while I can change that going forward, it'll take a few places to change it so it accepts both (I've changed other code so now I can take only the ID number). Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 Also, don't remove the XLR before the numbers in the pilot ID, just remove it from the CompanyICAO. It's the way I need the complete ID and code of the pilot, while I can change that going forward, it'll take a few places to change it so it accepts both (I've changed other code so now I can take only the ID number). Glad to have helped ! But concerning the CompanyICAO, are saying I should remove it from the INI ? In that case, the INI would become invalid ! (To be honest, I didn't catch that point... You can still PM or email me if you want to push things forward) Cheers ! Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 Well, redownload the ini file from your site and compare, the CompanyICAO will be blanked out, don't remove it but set it blank so the line reads: CompanyICAO= And for your pilot ID, include the airline numbers Quote Link to comment Share on other sites More sharing options...
Wayne Posted January 5, 2009 Report Share Posted January 5, 2009 Harry and great and it works!!!! Woot, thanks guys now i just need to find out why FSACARS wount update my stupid log, its suck on this one flight, haha Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 Well, redownload the ini file from your site and compare, the CompanyICAO will be blanked out, don't remove it but set it blank so the line reads: CompanyICAO= And for your pilot ID, include the airline numbers Heh... I wouldn't do that if I where you... As fsacars will not work correctly ! Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 Works just fine here and for the others who have done it. What's going on? Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 fsacars shows blank choice at startup... and no fields are pre-entered at startup... Well don't knowif it is the best way to do this :-) Cheers Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 It should show the pilot ID in place. Redownload the config from your site. and see if that's okay. I'm reformatting the ID stuff Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 Here is what I see when I configure the INI file like this : [FSacars] CompanyICAO= CompanyName=VA Name CompanySite=http://........ UnitSystem=IS Remarks=RMK/ UseLocal=0 PilotNumber=XLR003 CompanyIATA=FLIGHT # I don't think it is normal behaviour... Cheers fsacars_main.jpg Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 Nothing in the dropdown? Weird. It shows the VA name for me. Do you have the latest version? Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 5, 2009 Author Report Share Posted January 5, 2009 Nothing in the dropdown? Weird. It shows the VA name for me. Do you have the latest version? Yes latest version and nothing in the dropdown menu... Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 5, 2009 Administrators Report Share Posted January 5, 2009 I'll check when I get home, I don't have FS/FSACARS here. Can anyone else reading this confirm? Quote Link to comment Share on other sites More sharing options...
maxwaldorf Posted January 6, 2009 Author Report Share Posted January 6, 2009 My fault, I played with my PHP editor and forgot to erase some comments... Seems you're not the only one ! Cheers Quote Link to comment Share on other sites More sharing options...
davehardy Posted January 10, 2009 Report Share Posted January 10, 2009 ok im getting the error and nothing it sending at all. If i edit "CompanyICAO=EZE" to be "CompanyICAO=" then it doesnt show when i open FSACARS and i havent played about like Max above. Quote Link to comment Share on other sites More sharing options...
davehardy Posted January 10, 2009 Report Share Posted January 10, 2009 You can see that after clicking SEND LOG 01.jpg a new larger window opens 02.jpg but nothing loads, the flight info is all present in the left box to i hit OK it then sends me to image 03.jpg 01.jpg 02.jpg 03.jpg Quote Link to comment Share on other sites More sharing options...
Moderators mark1million Posted January 10, 2009 Moderators Report Share Posted January 10, 2009 Dave thats what i get, but it does seem to send the pirep but it doesnt show up on the pireps waiting to be approved you have to go in to the admin and view all. strange.. Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 10, 2009 Administrators Report Share Posted January 10, 2009 He commented out one line in the code, in core/modules/acars/fsacars.php, did you do that? Quote Link to comment Share on other sites More sharing options...
davehardy Posted January 10, 2009 Report Share Posted January 10, 2009 this? print_r($data); Yeah didnt make any difference i will remove it again and try. I check under View All and still empty Quote Link to comment Share on other sites More sharing options...
Administrators Nabeel Posted January 10, 2009 Administrators Report Share Posted January 10, 2009 After you click "stop log" then accept flight, does it get sent then? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.