DisposableHero

No bad feelings here too Hope you can figure out a solution to the main topic Good luck and safe flights

A waypoint can not be defined as a "destination", that is a fact for flight planning and this can not be changed (not in real life, not in phpvms). What you can do in real life is using ZZZZ as your dep/arr airport and define coordinates in the remarks of your flight plan so the system (and Air Traffic Controller) understands that you will start/end your flight in a specific coordinate instead of an airport. So, if you want to check your pilots fly over certain points (like a waypoint, vor, ndb etc. which have coordinates) you need to build up a listener working either with pirepfiled event or with pirepupdated events to achieve your goal. You may not like it but without knowing the coordinates of those points, you can not get a proper result. vmsAcars sends back position reports and they do have coordinates for you to use in your checks When you know the coordinates of your required point then it will be some amount of math and some coding (to calculate a radius depending how precise you wish to check and searching matching pirep position reports). If the point flown is found or close enough to your requirement then it can pass, else fail. I am not sure if it will be possible, or practical to do these kinds of checks on vmsAcars side. Again you will have to define a specific point and some range for flexibility, use a custom rule to let it being checked live by vmsAcars. vmsAcars checks will run on client side (pilot's computer) and it may not be effective and will be risky if you can not code the custom rule properly (fails, crashes, excessive ram usage etc.). Therefore I would suggest having these kind of deeper checks at phpvms side but in the end, it is up to you to decide and develop Good luck PS: While working on your website for developments, please check the license requirements of Disposable addons and apply necessary changes to comply with them Right now you are violating license terms

You can keep the repo, to share your possible future awards classes if you wish to. There are endless possibilities for awards and with good classes, that repo can be a good community place to participate maybe. My pleasure

Nobody told you that "support" is ended, that is your own conclusion I told you that "development ended for v1 series" and this is not something to stop sales or support. We are testing v2 series and it is "hopefully" near to being released (best kind of support, is an improved new version) as "beta" (at least stable to be a beta and to see how many more bugs will be found by a wider range of users), so no need for being a grumpy old man When it gets to beta, you can download it and use as you wish, but also you can stick with v1, nobody will stop you doing that but the best support you will get for it will be "please upgrade to v2" because nobody will go back to an old code, fix it and release again while a new version is out and live And please until v2 gets released to public (as beta) be patient. 11-12 22:30:37|INFO; Arrived clicked 11-12 22:30:37|INFO; Moved into on block 11-12 22:30:37|INFO; Flight ended manually on taxi on Since you did not shared the entire log, I need some more info; * Which sim was this ? (MSFS, XP11, XP12, Prepar3D, Fsx) * Which aircraft was in use ? * Which airport you landed ? Safe flights.

Don't get this wrong or as a negative review please, but I need to ask this Why do you (or we) need to have a module for awards ? We can define our awards classes and use them, there is nothing stopping us to the that and everything we do will run in an award class, so a module is technically not needed for creating (or having additional) awards. You (or anybody else) can create award classes and share them, just document the needs, share it here in files/addons section PS : I would never award a pilot based on "planned" distance (or anything "planned"), they can extend their route for planning purposes just to fake it slightly on each flight to beat the competition. Just go for the reported/accepted distance Safe flights

Even though development ended for v1 series of vmsAcars, I would kindly suggest you to upload your logs as described here. Maybe they will give us some clues and they can be checked against during v2 alpha releases. (Like trying to re-create the same conditions, same aircraft, same airport etc.) Best wishes,

Ok, thanks for the feedback @MattW strange that I never had it but this definitely looks like something to focus on with @Nabeel I saw similar reports with v1 in which the "arrived clicked" was present in acars logs for no reason, hopefully we will not have it with v2.

More info for future checks ; https://docs.phpvms.net/acars/user-guide#flight-phases "End Flight" and automation for it is possible after landing, during taxi in and at arrived states. There may be a bug in v1 code (worst case)

Most probably it thinks the parking brakes are set (some simulators and aircraft report back braking as parking brake unfortunately). Try enabling the engine shutdown requirement for on block / arrival checks. (Admin > vmsAcars > Settings), maybe it helps. If this fails, we may need to wait for v2 to be in beta state for a wider range of tests, then we can track it if it continues Safe flights

No, it is not excellent and does basically what your plugin does Maybe something more on reporting and progress tracking. Great to see people working on addons for phpvms v7, it is always better to have a widespread and growing community. Thanks for your efforts and module/plugin.

Nowhere needs 777 permissions, in fact it is dangerous to have, thus this is not written, never will be! Why you though that it is needed in the first place? Looks like you have some sort of server configuration/permission problems in the beginning. If you look into the sections of the forum, you will see that it is clearly organized (like v2/v5 and v7 is separated). And just from "V7 > Support" section you can see that forum is active (not like Discord for sure but you will see people communicating) Above answer applies, even Discord uses the same logic for separation, nobody can guide you anymore sorry. That happens when somehow your email (or ip address) gets blocked (blacklisted) for a reason (it can be a false positive), and when this happens people ask for support and provide their email address to the developer privately when asked etc. Anyway, you are first claiming all of these yet you somehow found the correct section of the forum to post your question. And this was what you need without all that drama. As I wrote above, Good luck and God Speed. Hope you can have a nicely working install and have fun using it.

Strange... I mean, finding info and guides on forum irrelevant, thinking that phpVMS and vmsACARS is not active is strange. What you needed was just a forum post We are always active at Discord (link is at the menu above) and checking the forum daily (at least for v7 section). Anyway, the docs are below (which is also present in the menu above); https://docs.phpvms.net You can always download the latest build from below links (if you don't want to utilize Git features); https://phpvms.cdn.vmslabs.net/phpvms-latest-dev.zip https://phpvms.cdn.vmslabs.net/phpvms-latest-dev.tar.gz Good luck and God speed with your install/update.

Best way to understand this is checking the cron log @Imanol , they are placed alongside with your laravel logs under storage/logs folder. If it is not there, or there but nothing in it are clear signs of cron problems (95% hosting limitations, 5% user error / server misconfiguration) And if it is running properly, you may need to wait until UTC midnight, (nightly cron) for user checks (active / leave switch) Good luck

Additionally, be sure your cron command is running the exact same php version with your hosting account/domain where phpvms runs. Running phpvms with php8.1 but trying to run cron with php8.0 or php8.2 will cause failure. So whenever you try different php versions, or update them be 100% sure that cron is using the same php executable. Good luck

I shared my thoughts already at Discord. Looks like your install is not good and you have file/folder access problems.

No, they are not and vmsAcars is telling you exactly this with a message box whenever you try to scan your sceneries. 09-13 17:32:26|INFO; Found UserOpt file in C:\Users\PC GAMER\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\UserCfg.opt 09-13 17:32:26|ERROR; UnauthorizedAccessException: Access to the path 'C:\Users\PC GAMER\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\UserCfg.opt' is denied. 09-13 17:32:26|INFO; MessageBox, message=There was an error trying to access the path, permissions denied. Run as admin or check the folder security https://docs.phpvms.net/acars/user-guide#permission-denied-errors Good luck

You can use two different loops to display different awards according to your setup @Imanol @foreach($user->awards->whereIn('id', [1,2,4,5,7,90]) as $awards) https://laravel.com/docs/10.x/collections#available-methods may help Or you can use some basic php functions to check the name, like if it contains some specific words to separate then @if(str_contains($award->description, 'Medal')) Good luck

https://github.com/nabeelio/phpvms/blob/dev/modules/Awards/Awards/PilotFlightAwards.php You can check the default award classes to have a better understanding how it works, and then you can create your own classes as you wish. For displaying them separately in pilot profile you need to edit the blade file(s) of your theme as you wish. You can use some filtering within the loops or anything else matching your needs. https://github.com/nabeelio/phpvms/blob/dev/resources/views/layouts/default/profile/index.blade.php Good luck

Nicely explained, thanks

Already did as we speak Issue Link : https://github.com/nabeelio/phpvms/issues/1873 Solution Link (Pull Request) : https://github.com/nabeelio/phpvms/pull/1874 So when this gets merged, a new dev build will be released and this will not be problem anymore for anyone I hope Have a nice night.

Ok, Now disable (dash out) the dump by adding two dashes before it followed by a space as below. // dd($point, $attrs); Map should be working now

I saw it, thanks Here 0 and 1 is ok, they are floats but 2 is a string (notice the double quotes and display difference) and it is the altitude. So line 42 is causing trouble. Would you please change it as below and save the file (keep the dd for now) $point[] = floatval($attrs['alt']);

A simple way to debug this error can be done by adding below text to line 44 of the mentioned file (app/Models/GeoJson.php) and saving it dd($point, $attrs); With this, instead of erroring out code will dump the data (contents) of $point and $attrs and stop there (die), hence the helper is called dump and die "dd". Good luck again

Also the error is simple (this is why I am suspecting the client and/or communications in between) GeoJson expects a value like "12345" (which is an integer) or "12345.67" (which is a float). So a value like "N 12345" (notice the N and space which is a string) or "12345,67" (notice the comma, which makes this a string too) or the value is just an empty string "" (thus can not considered as null in some cases) will create the above error We saw in some European servers, comma is being used as the decimal separator instead of a point, which was creating a problem in monetary values, same can be happening here too (a server forcing comma can mess up internal easily) Good luck

As the error is related with a core feature (direct communication between acars client and phpvms v7 itself), it can not be related with any Dispo addon as my addons do not alter core/communication files. Dispo Theme only displays the map created by phpvms, only the look of the page is different. In the other topic same/similar error was reported, and the admin did not provided any details for debugging What I can assume from the error is, somehow the coordinates are not being recorded at all or not being recorded properly (faulty9, by the acars software being used (either vmsAcars or any other solution) thus the map is failing to create a geographic location properly. To better understand this error, we need to re-create or live debug during a flight (while the error is happening) @Aorly1, the data transferred by acars client and the data recorded to the database needs to be checked live (by some debug lines added to some files and then then inspecting the log to spot the differences). Additionally we can suspect the server dropping/altering http post data during a forced redirect (imagine like the server uses https, server has a forced redirection from http to https, client is configured to use http by the pilot). This needs to be checked too. Hope this helps.