Auto Accept/Reject Pirep

Patrick1246 · April 13, 2016

install works, but it doesn't accept any pirep.

on line 755 in PIREPData.Class.php

# Do other assorted tasks that are along with a PIREP filing
 # Update the flown count for that route
 self::UpdatePIREPFeed();
 # Update any pilot's information
 $pilotinfo = PilotData::getPilotData($pirepdata['pilotid']);
 $pilotcode = PilotData::getPilotCode($pilotinfo->code, $pilotinfo->pilotid);
 PilotData::UpdateLastPIREPDate($pilotinfo->pilotid);
PirepAcData::search($pirepid);

 if (Config::Get('EMAIL_SEND_PIREP') === true) {

	 # Send an email to the admin that a PIREP was submitted
	 $sub = "A PIREP has been submitted by {$pilotcode} ({$pirepdata['depicao']} - {$pirepdata['arricao']})";
	 $message = "A PIREP has been submitted by {$pilotcode} "
		 ."({$pilotinfo->firstname} {$pilotinfo->lastname})\n\n"
		 ."{$pirepdata['code']}{$pirepdata['flightnum']}: {$pirepdata['depicao']} to {$pirepdata['arricao']}\n"
		 ."Aircraft: {$pirepdata['aircraft']}\n" . "Flight Time: {$pirepdata['flighttime']}\n"
		 ."Landing Rate: {$pirepdata['landingrate']}\n"."Filed using: {$pirepdata['source']}\n\n"
		 ."Comment: {$comment}\n\n"
		 ."Click to approve this pirep (admin must be signed in):\n"
		 .adminurl('/pirepadmin/approvepirep/'.$pirepid);

Vangelis · April 14, 2016

Do you have any errors in your logs ?

Patrick1246 · April 14, 2016

]Backtrace: DB::write_debug > DB::query > PIREPData::addComment > PirepAcData::search > PIREPData::fileReport > ACARSData::FilePIREP > smartCARS::filepirep
Query: INSERT INTO phpvms_pirepcomments (`pirepid`, `pilotid`, `comment`, `postdate`) VALUES (17874, 1, 'Your Pirep has been rejected because you exeeded maximum landing rate of-600', NOW())
Error: (1062) - Duplicate entry '0' for key 'PRIMARY'

that was my fault auto increment was not set

however, it still doesn't accept an pirep, and there is no error in the log

Vangelis · April 14, 2016

does it reject the pireps that should be rejected ?

Patrick1246 · April 14, 2016

It doesn't reject the pirep, but it adds the comment to it

Your Pirep has been rejected because you exeeded maximum landing rate of-100

DesComm · May 29, 2016

[sOLVED] We have done a clean install of this and converted all of the .tpl - .php. We are getting the following errors:

Strict Standards: Non-static method PirepAcData::get_criteria() should not be called statically, assuming $this from incompatible context in /......com/admin/modules/PirepAutoAccept/PirepAutoAccept.php on line 52

Criteria List

Strict Standards: Non-static method PirepAcData::get_settings() should not be called statically, assuming $this from incompatible context in /......com/admin/modules/PirepAutoAccept/PirepAutoAccept.php on line 54

Extra Settings

If I "enable" and 'Save" get the following error:

Strict Standards: Non-static method PirepAcData::editSettings() should not be called statically, assuming $this from incompatible context in /......com/admin/modules/PirepAutoAccept/PirepAutoAccept.php on line 135

There was an error editing the Settings

This is with the custom PirepAcData.class.php installed

Looking for a fix!

Edited June 6, 2016 by DesComm

zakachkin · June 27, 2016

Hello!

This plugin can reject pireps transferred from VA website?

How to do it?

Vangelis · June 29, 2016

This plugin work only during the filing of the pirep

FlightDeckES · June 30, 2016

Here we go again 1 more to try

hello I get no matter autopirep.sql help please

Vangelis · July 2, 2016

i dont understand .

Do you mean that there is no autopirep.sql ?

DanishFlipper · July 22, 2016

Hi guys,

I just installed this module today, but i got some errors in it.. When im removing () this on line 52 in PirepAutoAccept.php an just leave it with ), im getting a fatal error.

Error 1 :

http://prntscr.com/bw9xeq

Error 2 :

http://prntscr.com/bw9xxe

Can some one please help me out

Regards

Michael

web541 · July 22, 2016

Replace the code with the original with the () and then go into core/common/PIREPAcData.class.php and find this

public function get_criteria()

and replace it with

public static function get_criteria()

DanishFlipper · July 23, 2016

Replace the code with the original with the () and then go into core/common/PIREPAcData.class.php and find this
public function get_criteria()
and replace it with
public static function get_criteria()

Hello web541,

Thanks for you help, that worked ..

But now i just have this error when im viewing my pending pireps after putting this code inside Pirepdata.class.php PirepAcData::search($pirepid);

its giving me this error now : Strict Standards: Non-static method PirepAcData::search() should not be called statically in /span/spanstrong/home/vaemirat/public_html/core/common/PIREPData.class.php on line 812.

An when adding some settings to it, after pressing save changes, im getting this error : Strict Standards Non-static method PirepAcData::editSettings() should not be called statically, assuming $this from incompatible context in /home/vaemirat/public_html/admin/modules/PirepAutoAccept/PirepAutoAccept.php on line 135

Can you help with that ?? Or what are im doing wrong with this module

Thanks

Edited July 23, 2016 by DanishFlipper

web541 · July 23, 2016

Yeah, same issue here, I assume you are using the phpvms 5.5.x version, therefore all

public function

should be replaced with

public static function

in core/common/PIREPAcData.class.php or conveniently, use this version that I modified a while back

http://forum.phpvms.net/topic/20692-auto-acceptreject-pirep/page__st__160#entry123625

DanishFlipper · July 23, 2016

Yeah, same issue here, I assume you are using the phpvms 5.5.x version, therefore all
public function
should be replaced with
public static function
in core/common/PIREPAcData.class.php or conveniently, use this version that I modified a while back

http://forum.phpvms....160#entry123625

Thanks for file champ ...

Some of the errors went away, but i still have some errors left, so i decided to delete the plugin totally.. I have no idea what the hell is going on, but thanks for your help anyway champ ..

Regards

Michael

Edited July 23, 2016 by DanishFlipper

web541 · July 24, 2016

Thanks for file champ ...

Some of the errors went away, but i still have some errors left, so i decided to delete the plugin totally.. I have no idea what the hell is going on, but thanks for your help anyway champ ..

Regards

Michael

Which errors?

Txmmy83 · July 24, 2016

two Problems when using this Module it does not sent PIREP to Vacentral second is that it is not compatible with any custom reward system like Simpilots Pilot Rewards or Crazycreatives Premium Miles

if it would work with these Reward Systems it would be Great

DanishFlipper · July 25, 2016

Which errors?

I did not look at which ones, i got mad on it cause i keept getting errors, so itÂ´s gone now ..

eliezerazevedo · September 10, 2016

Not valid my PIREP.

I use CAVACARS

PIREPData.class.php

<?php
/**
* phpVMS - Virtual Airline Administration Software
* Copyright (c) 2008 Nabeel Shahzad
* For more information, visit www.phpvms.net
* Forums: http://www.phpvms.net/forum
* Documentation: http://www.phpvms.net/docs
*
* phpVMS is licenced under the following license:
*   Creative Commons Attribution Non-commercial Share Alike (by-nc-sa)
*   View license.txt in the root, or visit http://creativecommons.org/licenses/by-nc-sa/3.0/
*
* @author Nabeel Shahzad
* @copyright Copyright (c) 2008, Nabeel Shahzad
* @link http://www.phpvms.net
* @license http://creativecommons.org/licenses/by-nc-sa/3.0/
*/
class PIREPData extends CodonData
{
public static $lasterror;
public static $pirepid;


/**
 * A generic find function for schedules. As parameters, do:
 *
 * $params = array( 's.depicao' => 'value',
 *	 's.arricao' => array ('multiple', 'values'),
 * );
 *
 * Syntax is ('s.columnname' => 'value'), where value can be
 * an array is multiple values, or with a SQL wildcard (%)
 *  if that's what is desired.
 *
 * Columns from the schedules table should be prefixed by 's.',
 * the aircraft table as 'a.'
 *
 * You can also pass offsets ($start and $count) in order to
 * facilitate pagination
 *
 * @tutorial http://docs.phpvms.net/media/development/searching_and_retriving_schedules
 */
public static function findPIREPS($params,  $count = '', $start = '')
{
 $sql = 'SELECT p.*, UNIX_TIMESTAMP(p.submitdate) as submitdate,
 u.pilotid, u.firstname, u.lastname, u.email, u.rank,
 a.id AS aircraftid, a.name as aircraft, a.registration,
 dep.name as depname, dep.lat AS deplat, dep.lng AS deplng,
 arr.name as arrname, arr.lat AS arrlat, arr.lng AS arrlng	 
   FROM '.TABLE_PREFIX.'pireps p
   LEFT JOIN '.TABLE_PREFIX.'aircraft a ON a.id = p.aircraft
   LEFT JOIN '.TABLE_PREFIX.'airports AS dep ON dep.icao = p.depicao
   LEFT JOIN '.TABLE_PREFIX.'airports AS arr ON arr.icao = p.arricao
   LEFT JOIN '.TABLE_PREFIX.'pilots u ON u.pilotid = p.pilotid ';

 /* Build the select "WHERE" based on the columns passed */ 
 $sql .= DB::build_where($params);

 if(Config::Get('PIREPS_ORDER_BY') != '')
 {
  $sql .= ' ORDER BY '.Config::Get('PIREPS_ORDER_BY');
 }

 if(strlen($count) != 0)
 {
  $sql .= ' LIMIT '.$count;
 }

 if(strlen($start) != 0)
 {
  $sql .= ' OFFSET '. $start;
 }

 $ret = DB::get_results($sql);
 return $ret;
}/**
 * Get internal data for the past $interval months, including the
 * total number of PIREPS and revenue
 *
 * @param array $where_params Any specific conditions to search on
 * @param int $interval The interval, in months
 * @return mixed This is the return value description
 *
 */
public static function getIntervalDataByMonth($where_params, $interval='6')
{
 $date_clause = "DATE_SUB(NOW(), INTERVAL {$interval} MONTH) <= p.submitdate";

 /* See if this array already exists */
 if(!is_array($where_params))
 {
  $where_params=array($date_clause);
 }
 else
 {
  $where_params[] = $date_clause;
 }

 $data = self::getIntervalData($where_params);

 if(!$data)
 {
  return array();
 }

 foreach($data as $month)
 {
  $month = FinanceData::calculateFinances($month);
 }

 return $data;
}

/**
 * Get internal data for the past $interval days, including the
 * total number of PIREPS and revenue
 *
 * @param array $where_params Any specific conditions to search on
 * @param int $interval The interval, in days
 * @return mixed This is the return value description
 *
 */
public static function getIntervalDataByDays($where_params, $interval='7')
{
 $date_clause = "DATE_SUB(CURDATE(), INTERVAL {$interval} DAY)  <= p.submitdate";

 /* See if this array already exists */
 if(!is_array($where_params))
 {
  $where_params=array($date_clause);
 }
 else
 {
  $where_params[] = $date_clause;
 }

 return self::getIntervalData($where_params, 'D');
}


/**
 * Get interval financial data, with the date clause
 * passed in as a WHERE:
 *
 * "DATE_SUB(CURDATE(), INTERVAL {$interval} DAY)  <= p.submitdate";
 *
 * Or some form of a date limitation, but has to be within the
 * where clause
 *
 * @param array $where_params Any WHERE parameters
 * @param char $grouping How to group data - Y for yearly, M for monthly, D for daily
 * @return array Returns finance data according to the above grouping
 *
 */
public static function getIntervalData($where_params, $grouping='M')
{
 $grouping = strtolower($grouping);

 if($grouping == 'y')
 {
  $format = '%Y';
 }
 elseif($grouping == 'm')
 {
  $format = '%Y-%m';
 }
 elseif($grouping == 'd') /* go by day */
 {
  $format = '%Y-%m-%d';
 }

 $sql = "SELECT DATE_FORMAT(p.submitdate, '{$format}') AS ym,
 UNIX_TIMESTAMP(p.submitdate) AS timestamp,
 COUNT(p.pirepid) AS total,
 SUM(p.revenue) as revenue,
 SUM(p.gross) as gross,
 SUM(p.fuelprice) as fuelprice,
 SUM(p.price) as price,
 SUM(p.expenses) as expenses,
 SUM((TIME_TO_SEC(flighttime_stamp)/60) * (pilotpay/60)) as pilotpay
   FROM ".TABLE_PREFIX."pireps p";

 $sql .= DB::build_where($where_params);
 $sql .= ' GROUP BY `ym` ORDER BY `timestamp` ASC';

 $results = DB::get_results($sql);

 return $results;
}

/**
 * Return all of the pilot reports. Can pass a start and
 * count for pagination. Returns 20 rows by default. If you
 * only want to return the latest n number of reports, use
 * getRecentReportsByCount()
 *
 */
public static function getAllReports($count = '', $start = 0)
{
 return self::findPIREPS(array(), $count, $start);
}

/**
 * Get all of the reports by the accepted status. Use the
 * constants:
 * PIREP_PENDING, PIREP_ACCEPTED, PIREP_REJECTED,PIREP_INPROGRESS
 */
public static function getAllReportsByAccept($accepted = 0)
{
 $params = array(
  'p.accepted'=>$accept
 );

 return self::findPIREPS($params);
}

public static function getAllReportsFromHub($accepted = 0, $hub)
{
 $params = array(
  'p.accepted' => $accepted,
  'u.hub' => $hub
 );

 return self::findPIREPS($params);
}
/**
 * Get the latest reports that have been submitted,
 * return the last 10 by default
 */
public static function getRecentReportsByCount($count = 10)
{
 if($count == '') $count = 10;

 return self::findPIREPS('', $count);
}/**
 * Get the latest reports by n number of days
 */
public static function getRecentReports($days=2)
{
 # No => assumes just to plop in the entire expression "raw"
 $params = array(
  'DATE_SUB(CURDATE(), INTERVAL '.$days.' DAY) <= p.submitdate'
 );

 return self::findPIREPS($params);
}

/**
 * Get all of the reports by the exported status (true or false)
 */
public static function getReportsByExportStatus($status)
{
 if($status === true)
  $status = 1;
 else
  $status = 0;

 return self::findPIREPS(array('p.exported'=>$status));
}
/**
 * Get the number of reports on a certain date
 *  Pass unix timestamp for the date
 */
public static function getReportCount($date)
{
 $sql = 'SELECT COUNT(*) AS count
   FROM '.TABLE_PREFIX.'pireps
   WHERE DATE(submitdate)=DATE(FROM_UNIXTIME('.$date.'))';  $row = DB::get_row($sql);
 if(!$row)
  return 0;

 return ($row->count=='') ? 0 : $row->count;
}

/**
 * Get the number of reports on a certain date, for a certain route
 *
 * @param string $code Airline code
 * @param string $flightnum Flight number
 * @param timestamp $date UNIX timestamp
 */
public static function getReportCountForRoute($code, $flightnum, $date)
{
 $MonthYear = date('mY', $date);
 $sql = "SELECT COUNT(*) AS count
   FROM ".TABLE_PREFIX."pireps
   WHERE DATE_FORMAT(submitdate, '%c%Y') = '$MonthYear'
 AND code='$code' AND flightnum='$flightnum'";
 $row = DB::get_row($sql);
 return $row->count;
}/**
 * Get the number of reports for the last x  number of days
 * Returns 1 row for every day, with the total number of
 * reports per day
 */
public static function getCountsForDays($days = 7)
{
 $sql = 'SELECT DISTINCT(DATE(submitdate)) AS submitdate,
 (SELECT COUNT(*) FROM '.TABLE_PREFIX.'pireps WHERE DATE(submitdate)=DATE(p.submitdate)) AS count
   FROM '.TABLE_PREFIX.'pireps p WHERE DATE_SUB(CURDATE(), INTERVAL 7 DAY) <= p.submitdate';
 return DB::get_results($sql);
}/**
 * Get all of the details for a PIREP, including lat/long of the airports
 */
public static function getReportDetails($pirepid)
{
 $sql = 'SELECT p.*, s.*, s.id AS scheduleid, p.route, p.route_details,
 u.pilotid, u.firstname, u.lastname, u.email, u.rank,
 dep.name as depname, dep.lat AS deplat, dep.lng AS deplng,
 arr.name as arrname, arr.lat AS arrlat, arr.lng AS arrlng,
    p.code, p.flightnum, p.depicao, p.arricao,  p.price AS price,
    a.id as aircraftid, a.name as aircraft, a.registration, p.flighttime,
    p.distance, UNIX_TIMESTAMP(p.submitdate) as submitdate, p.accepted, p.log
   FROM '.TABLE_PREFIX.'pilots u, '.TABLE_PREFIX.'pireps p
 LEFT JOIN '.TABLE_PREFIX.'airports AS dep ON dep.icao = p.depicao
 LEFT JOIN '.TABLE_PREFIX.'airports AS arr ON arr.icao = p.arricao
 LEFT JOIN '.TABLE_PREFIX.'aircraft a ON a.id = p.aircraft
 LEFT JOIN '.TABLE_PREFIX.'schedules s ON s.code = p.code AND s.flightnum = p.flightnum
   WHERE p.pilotid=u.pilotid AND p.pirepid='.$pirepid;
 $row = DB::get_row($sql);
 $row->rawdata = unserialize($row->rawdata);

 /* Do any specific replacements here */
 if($row)
 {
  /* If it's FSFlightKeeper, process the `rawdata` column, which contains
   array()'d copied of extra data that was sent by the ACARS. Run that
   through some templates which we've got. This can probably be generic-ized
   but it's fine now for FSFK. This can probably move through an outside
   function, but seems OK to stay in getReportDetails() for now, since this
   is semi-intensive code here (the most expensive is populating the templates,
   and I wouldn't want to run it for EVERY PIREP which is called by the system.
  */
  if($row->source == 'fsfk')
  {
   /* Do data stuff in the logs */
   $data = $row->rawdata;

   /* Process flight data */
   if(isset($data['FLIGHTDATA']))
   {
 Template::Set('data', $data['FLIGHTDATA']);
 $flightdata = Template::Get('fsfk_log_flightdata.tpl', true, true, true);
 $row->log.=$flightdata;
 unset($flightdata);
   }

   /* Process the flightplan */
   if(isset($data['FLIGHTPLAN']))
   {
 $value = trim($data['FLIGHTPLAN']);
 $lines = explode("\n", $value);

 Template::Set('lines', $lines);
 $flightplan = Template::Get('fsfk_log_flightplan.tpl', true, true, true);

 $row->log.=$flightplan;
 unset($flightplan);
   }

   /* Process flight critique data */
   if(isset($data['FLIGHTCRITIQUE']))
   {
 $value = $data['FLIGHTCRITIQUE'];
 $value = trim($value);
 preg_match_all("/(.*) \| (.*)\n/", $value, $matches);

 # Get these from a template
 Template::Set('matches', $matches);
 $critique = Template::Get('fsfk_log_flightcritique.tpl', true, true, true);

 $row->log.=$critique;
 unset($critique);
   }

   /* Process the flight images, last */
   if(isset($data['FLIGHTMAPS']))
   {
 Template::Set('images', $data['FLIGHTMAPS']);
 $flightimages = Template::Get('fsfk_log_flightimages.tpl', true, true, true);
 $row->log.=$flightimages;
 unset($flightimages);
   }
  } /* End "if FSFK" */


  if($row->route_details != '')
  {
   $row->route_details = unserialize($row->route_details);
  }
  else
  {
   $row->route_details = NavData::parseRoute($row);

   # Save it for future?
   //PIREPData::updatePIREPFields($row->pirepid, array('route_details'=>serialize($row->route_details)));
  }

 } /* End "if $row" */

 return $row;
}/**
 * Get the latest reports for a pilot
 */
public static function getLastReports($pilotid, $count = 1, $status='')
{
 $sql = 'SELECT * FROM '.TABLE_PREFIX.'pireps
 WHERE pilotid='.intval($pilotid);

 # Check it via the status
 if($status != '')
 {
  $sql .= ' AND accepted='.$status;
 }

 $sql .=' ORDER BY submitdate DESC
 LIMIT '.intval($count);
 if($count == 1)
  return DB::get_row($sql);
 else
  return DB::get_results($sql);
}/**
 * Get a pilot's reports by the status.  Use the
 * constants:
 * PIREP_PENDING, PIREP_ACCEPTED, PIREP_REJECTED, PIREP_INPROGRESS
 */
public static function getReportsByAcceptStatus($pilotid, $accept=0)
{
 $sql = 'SELECT *
 FROM '.TABLE_PREFIX.'pireps
 WHERE pilotid='.intval($pilotid).'
  AND accepted='.intval($accept);
 return DB::get_results($sql);
}

/**
 * Get the count of comments
 */

public static function getCommentCount($pirepid)
{
 $sql = 'SELECT COUNT(*) AS total FROM '.TABLE_PREFIX.'pirepcomments
 WHERE pirepid='.$pirepid.'
 GROUP BY pirepid';

 $total = DB::get_row($sql);

 if($total == '')
  return 0;

 return $total->total;
}

public static function setAllExportStatus($status)
{
 if($status === true)
  $status = 1;
 else
  $status = 0;

 $sql = 'UPDATE '.TABLE_PREFIX.'pireps
   SET `exported`='.$status;

 $res = DB::query($sql);

 if(DB::errno() != 0)
 {
  return false;
 }

 return true;
}

public static function setExportedStatus($pirepid, $status)
{
 if($status === true)
  $status = 1;
 else
  $status = 0;

 return self::editPIREPFields($pirepid, array('exported' => $status));
}/**
 * Get all of the comments for a pilot report
 */
public static function getComments($pirepid)
{
 $sql = 'SELECT c.*, UNIX_TIMESTAMP(c.postdate) as postdate,
  p.firstname, p.lastname
 FROM '.TABLE_PREFIX.'pirepcomments c, '.TABLE_PREFIX.'pilots p
 WHERE p.pilotid=c.pilotid AND c.pirepid='.$pirepid.'
 ORDER BY postdate ASC';
 return DB::get_results($sql);
}

public static function deleteComment($comment_id)
{
 $sql = 'DELETE FROM '.TABLE_PREFIX.'pirepcomments WHERE `id`='.$comment_id;
 $res = DB::query($sql);

 if(DB::errno() != 0)
 {
  return false;
 }

 return true;
}

/**
 * File a PIREP
 */
public static function newPIREP($pirepdata)
{
 self::fileReport($pirepdata);
}

public static function filePIREP($pirepdata)
{
 self::fileReport($pirepdata);
}

public static function fileReport($pirepdata)
{

 /*$pirepdata = array('pilotid'=>'',
   'code'=>'',
   'flightnum'=>'',
   'depicao'=>'',
   'arricao'=>'',
   'aircraft'=>'',
   'flighttime'=>'',
   'submitdate'=>'',
   'comment'=>'',
   'fuelused'=>'',
   'source'=>''
   'log'=>'');*/

 if(!is_array($pirepdata))
  return false;

 $pirepdata['code'] = strtoupper($pirepdata['code']);
 $pirepdata['flightnum'] = strtoupper($pirepdata['flightnum']);
 $pirepdata['depicao'] = strtoupper($pirepdata['depicao']);
 $pirepdata['arricao'] = strtoupper($pirepdata['arricao']);

 /* Check if this PIREP was just submitted, check the last 10 minutes
 */
 if(Config::Get('PIREP_CHECK_DUPLICATE') == true)
 {
  $time_limit = Config::Get('PIREP_TIME_CHECK');
  if(empty($time_limit))
  {
   $time_limit = 1;
  }

  $sql = "SELECT `pirepid` FROM ".TABLE_PREFIX."pireps
 WHERE `pilotid`={$pirepdata['pilotid']}
  AND `code`='{$pirepdata['code']}'
  AND `flightnum`='{$pirepdata['flightnum']}'
  AND DATE_SUB(NOW(), INTERVAL {$time_limit} MINUTE) <= `submitdate`";

  $res = DB::get_row($sql);

  if($res)
  {
   self::$lasterror = 'This PIREP was just submitted!';
   return;
  }
 }

 if(isset($pirepdata['log']))
 {
  $pirepdata['log'] = DB::escape($pirepdata['log']);
 }
 else
 {
  $pirepdata['log'] = '';
 }

 if($pirepdata['depicao'] == '' || $pirepdata['arricao'] == '')
 {
  self::$lasterror = 'The departure or arrival airports are blank';
  return false;
 }

 # Check the aircraft
 if(!is_numeric($pirepdata['aircraft']))
 {
  // Check by registration
  $ac = OperationsData::getAircraftByReg($pirepdata['aircraft']);
  if($ac)
  {
   $pirepdata['aircraft'] = $ac->id;
  }
  else
  {
   // Check by name
   $ac = OperationsData::getAircraftByName($pirepdata['aircraft']);
   if($ac)
   {
 $pirepdata['aircraft'] = $ac->id;
   }
  }
 }

 # Check the airports, add to database if they don't exist
 $depapt = OperationsData::getAirportInfo($pirepdata['depicao']);
 if(!$depapt)
 {	 
  $depapt = OperationsData::RetrieveAirportInfo($pirepdata['depicao']);
 }

 $arrapt = OperationsData::getAirportInfo($pirepdata['arricao']);
 if(!$arrapt)
 {
  $arrapt = OperationsData::RetrieveAirportInfo($pirepdata['arricao']);	 
 }  # Look up the schedule
 $sched = SchedulesData::getScheduleByFlight($pirepdata['code'], $pirepdata['flightnum']);

 /* Get route information, and also the detailed layout of the route
  Store it cached, in case the schedule changes later, then the route
  information remains intact. Also, if the nav data changes, then
  the route is saved as it was
  */

 if(!empty($pirepdata['route']))
 {
  /* They supplied some route information, so build up the data
   based on that. It needs a certain structure passed, so build that */

  $pirepdata['route'] = str_replace('SID', '', $pirepdata['route']);
  $pirepdata['route'] = str_replace('STAR', '', $pirepdata['route']);
  $pirepdata['route'] = trim($pirepdata['route']);

  $tmp = new stdClass();
  $tmp->deplat = $depapt->lat;
  $tmp->deplng = $depapt->lng;
  $tmp->route = $pirepdata['route'];

  $pirepdata['route_details'] = NavData::parseRoute($tmp);
  $pirepdata['route_details'] = serialize($pirepdata['route_details']);
  unset($tmp);
 }

 if(empty($pirepdata['route']) && !empty($sched->route))
 {
  $pirepdata['route'] = $sched->route;
  $pirepdata['route'] = str_replace('SID', '', $pirepdata['route']);
  $pirepdata['route'] = str_replace('STAR', '', $pirepdata['route']);
  $pirepdata['route'] = trim($pirepdata['route']);

  /* The schedule doesn't have any route_details, so let's populate
   the schedule while we're here. Then we'll use that same info
   to populate our details information
   */
  if(empty($sched->route_details))
  {
   $pirepdata['route_details'] = serialize(SchedulesData::getRouteDetails($sched->id));
  }
  else
  {
   /* The schedule does have route information, and it's already been cached */
   $pirepdata['route_details'] = $sched->route_details;
  }
 }

 $pirepdata['route'] = DB::escape($pirepdata['route']);

 if(!empty($pirepdata['route_details']))
 {
  $pirepdata['route_details'] = DB::escape($pirepdata['route_details']);
 }

 /* This setting forces the next code to automatically
  calculate a load value for this current PIREP */
 if(Config::Get('PIREP_OVERRIDE_LOAD') == true)
 {
  $pirepdata['load'] == '';
 }

 # Check the load, if it's blank then look it up
 # Based on the aircraft that was flown
 if(!isset($pirepdata['load']) || empty($pirepdata['load']))
 {
  $pirepdata['load'] = FinanceData::getLoadCount($pirepdata['aircraft'], $sched->flighttype);
 }

 /* If the distance isn't supplied, then calculate it */
 if(!isset($pirepdata['distance']) || empty($pirepdata['distance']))
 {
  $pirepdata['distance'] = OperationsData::getAirportDistance($depapt, $arrapt);
 }

 /* See if there's a landing rate */
 if(!isset($pirepdata['landingrate']) || empty($pirepdata['landingrate']))
 {
  $pirepdata['landingrate'] = 0;
 }

 /* Any "raw" parameterized data which needs to be added */
 if(isset($pirepdata['rawdata']))
 {
  $pirepdata['rawdata'] = DB::escape(serialize($pirepdata['rawdata']));
 }
 else
 {
  $pirepdata['rawdata'] = '';
 }

 /* Escape the comment field */
 $pirepdata['log'] = DB::escape($pirepdata['log']);
 $comment = DB::escape($pirepdata['comment']);

 /* Proper timestamp */
 $flighttime_stamp = str_replace('.', ':', $pirepdata['flighttime']).':00';
 $pirepdata['flighttime'] = str_replace(':', '.', $pirepdata['flighttime']);

 /* Export status as 0 */
 $pirepdata['exported'] = 0;

 $sql = "INSERT INTO ".TABLE_PREFIX."pireps(
   `pilotid`,
   `code`,
   `flightnum`,
   `depicao`,
   `arricao`,
   `route`,
   `route_details`,
   `distance`,
   `aircraft`,
   `flighttime`,
   `flighttime_stamp`,
   `landingrate`,
   `submitdate`,
   `accepted`,
   `log`,
   `load`,
   `fuelused`,
   `expenselist`,
   `source`,
   `exported`,
   `rawdata`)
 VALUES ( {$pirepdata['pilotid']},
   '{$pirepdata['code']}',
   '{$pirepdata['flightnum']}',
   '{$pirepdata['depicao']}',
   '{$pirepdata['arricao']}',
   '{$pirepdata['route']}',
   '{$pirepdata['route_details']}',
   '{$pirepdata['distance']}',
   '{$pirepdata['aircraft']}',
   '{$pirepdata['flighttime']}',
   '{$flighttime_stamp}',
   '{$pirepdata['landingrate']}',
   NOW(),
   ".PIREP_PENDING.",
   '{$pirepdata['log']}',
   '{$pirepdata['load']}',
   '{$pirepdata['fuelused']}',
   '0',
   '{$pirepdata['source']}',
   {$pirepdata['exported']},
   '{$pirepdata['rawdata']}')";
 $ret = DB::query($sql);
 $pirepid = DB::$insert_id;

 // Add the comment if its not blank
 if($comment != '')
 {
  self::addComment($pirepid, $pirepdata['pilotid'], $pirepdata['comment']);
 }

 # Update the financial information for the PIREP, true to refresh fuel
 self::PopulatePIREPFinance($pirepid, true);

 # Do other assorted tasks that are along with a PIREP filing
 # Update the flown count for that route
 self::UpdatePIREPFeed();

 # Update any pilot's information
 $pilotinfo = PilotData::getPilotData($pirepdata['pilotid']);
 $pilotcode = PilotData::getPilotCode($pilotinfo->code, $pilotinfo->pilotid);
 PilotData::UpdateLastPIREPDate($pilotinfo->pilotid);
 PirepAcData::search($pirepid);

 # Send an email to the admin that a PIREP was submitted
 $sub = "A PIREP has been submitted by {$pilotcode} ({$pirepdata['depicao']} - {$pirepdata['arricao']})";
 $message="A PIREP has been submitted by {$pilotcode} ({$pilotinfo->firstname} {$pilotinfo->lastname})\n\n"
   ."{$pirepdata['code']}{$pirepdata['flightnum']}: {$pirepdata['depicao']} to {$pirepdata['arricao']}\n"
   ."Aircraft: {$pirepdata['aircraft']}\n"
   ."Flight Time: {$pirepdata['flighttime']}\n"
   ."Filed using: {$pirepdata['source']}\n\n"
   ."Comment: {$pirepdata['comment']}";

 $email = Config::Get('EMAIL_NEW_PIREP');
 if(empty($email))
 {
  $email = ADMIN_EMAIL;
 }

 Util::SendEmail($email, $sub, $message);

 CentralData::send_pirep($pirepid);

 // Reset this ID back
 DB::$insert_id = $pirepid;
 self::$pirepid = $pirepid;
 return true;
}

public static function updateReport($pirepid, $pirepdata)
{
 self::updateFlightReport($pirepid, $pirepdata);
}

public static function updatePIREP($pirepid, $pirepdata)
{
 self::updateFlightReport($pirepid, $pirepdata);
}

public static function updateFlightReport($pirepid, $pirepdata)
{ 
 /*$pirepdata = array('pirepid'=>$this->post->pirepid,
   'code'=>$this->post->code,
   'flightnum'=>$this->post->flightnum,
   'leg'=>$this->post->leg,
   'depicao'=>$this->post->depicao,
   'arricao'=>$this->post->arricao,
   'aircraft'=>$this->post->aircraft,
   'flighttime'=>$this->post->flighttime,
   'load'=>$this->post->load,
   'price'=>$this->post->price,
   'pilotpay' => $this->post->pilotpay,
   'fuelused'=>$this->post->fuelused,
   'fuelunitcost'=>$this->post->fuelunitcost,
   'fuelprice'=>$fuelcost,
   'expenses'=>$this->post->expenses
   );
 */

 if(!is_array($pirepdata))
 {
  return false;
 }

 if($pirepdata['depicao'] == '' || $pirepdata['arricao'] == '')
 {
  return false;
 }

 $pirepinfo = self::getReportDetails($pirepid);

 $pirepdata['fuelprice'] = $pirepdata['fuelused'] * $pirepdata['fuelunitcost'];

 $flighttime_stamp = str_replace('.', ':', $pirepdata['flighttime']).':00';
 $pirepdata['flighttime'] = str_replace(':', ',', $pirepdata['flighttime']);

 $data = array(
  'price' => $pirepdata['price'],
  'load' => $pirepdata['load'],
  'expenses' => $pirepdata['expenses'],
  'fuelprice' => $pirepdata['fuelprice'],
  'pilotpay' => $pirepdata['pilotpay'],
  'flighttime' => $pirepdata['flighttime'],
 );

 $gross = floatval($pirepdata['load']) * floatval($pirepdata['price']);
 $revenue = self::getPIREPRevenue($data);

 $fields = array(
  'code' => $pirepdata['code'],
  'flightnum' => $pirepdata['flightnum'],
  'depicao' => $pirepdata['depicao'],
  'arricao' => $pirepdata['arricao'],
  'aircraft' => $pirepdata['aircraft'],
  'flighttime' => $pirepdata['flighttime'],
  'flighttime_stamp' => $flighttime_stamp,
  'load' => $pirepdata['load'],
  'price' => $pirepdata['price'],
  'gross' => $gross,
  'pilotpay' => $pirepdata['pilotpay'],
  'fuelused' => $pirepdata['fuelused'],
  'fuelunitcost' => $pirepdata['fuelunitcost'],
  'fuelprice' => $pirepdata['fuelprice'],
  'expenses' => $pirepdata['expenses'],
  'revenue' => $revenue,
 );

 return self::editPIREPFields($pirepid, $fields);
}

/**
 * Update any fields in a PIREP, other update functions come down to this
 *
 * @param int $pirepid ID of the PIREP to update
 * @param array $fields Array, column name as key, with values to update
 * @return bool
 *
 */
public static function updatePIREPFields($pirepid, $fields)
{
 return self::editPIREPFields($pirepid, $fields);
}

/**
 * Update any fields in a PIREP, other update functions come down to this
 *
 * @param int $pirepid ID of the PIREP to update
 * @param array $fields Array, column name as key, with values to update
 * @return bool
 *
 */
public static function editPIREPFields($pirepid, $fields)
{
 if(!is_array($fields))
 {
  return false;
 }

 $sql = "UPDATE `".TABLE_PREFIX."pireps` SET ";
 $sql .= DB::build_update($fields);
 $sql .= ' WHERE `pirepid`='.$pirepid;

 $res = DB::query($sql);

 if(DB::errno() != 0)
 {
  return false;
 }

 return true;
}

/**
 *
 * Populate PIREPS which have 0 values for the load/price, etc
 */

public static function populateEmptyPIREPS()
{ 
 $sql = 'SELECT *
   FROM '.TABLE_PREFIX.'pireps ';

 $results = DB::get_results($sql);

 if(!$results)
 {
  return true;
 }

 foreach($results as $row)
 {
  self::PopulatePIREPFinance($row, true);
 }

 return true; 
}

/**
 * Populate the PIREP with the fianancial info needed
 *  Pass the PIREPID or the PIREP row
 */

public static function populatePIREPFinance($pirep, $reset_fuel = false)
{
 if(!is_object($pirep) && is_numeric($pirep))
 {
  $pirep = PIREPData::getReportDetails($pirep);
  if(!$pirep)
  {
   self::$lasterror = 'PIREP does not exist';
   return false;
  }
 }

 # Set the PIREP ID
 $pirepid = $pirep->pirepid;
 $sched = SchedulesData::getScheduleByFlight($pirep->code, $pirep->flightnum, '');
 if(!$sched)
 {
  self::$lasterror = 'Schedule does not exist. Please update this manually.';
  return false;
 }

 $pilot = PilotData::getPilotData($pirep->pilotid);

 # Get the load factor for this flight
 if($pirep->load == '' || $pirep->load == 0)
 {
  $pirep->load = FinanceData::getLoadCount($pirep->aircraft, $sched->flighttype);
 }

 // Fix for bug #62, check the airport fuel price as 0 for live
 //$depapt = OperationsData::getAirportInfo($pirep->depicao);
 if($pirep->fuelunitcost == '' || $pirep->fuelunitcost == 0 || $reset_fuel == true)
 {
  $pirep->fuelunitcost = FuelData::getFuelPrice($pirep->depicao);
 }

 # Check the fuel
 if($pirep->fuelprice != '' || $reset_fuel == true)
 {
  $pirep->fuelprice = FinanceData::getFuelPrice($pirep->fuelused, $pirep->depicao);
 }

 # Get the expenses for a flight
 $total_ex = 0;
 $expense_list = '';

 /* Account for any fixed-cost percentages */
 $allexpenses = FinanceData::getFlightExpenses();
 if(is_array($allexpenses))
 {
  foreach($allexpenses as $ex)
  {
   $total_ex += $ex->cost;
  }
 }

 /* Account for any per-flight %age expenses */
 $all_percent_expenses = FinanceData::getFlightPercentExpenses();

 $gross = floatval($sched->price) * floatval($pirep->load);
 if(is_array($all_percent_expenses))
 { 
  foreach($all_percent_expenses as $ex)
  {
   $cost = str_replace('%', '', $ex->cost);
   $percent = $cost / 100;
   $total = ($gross * $percent);

   $total_ex += $total;
  }
 }

 $data = array(
  'price' => $sched->price,
  'load' => $pirep->load,
  'fuelprice' => $pirep->fuelprice,
  'expenses' => $total_ex,
  'pilotpay' => $pilot->payrate,
  'flighttime' => $pirep->flighttime,
 );

 $revenue = self::getPIREPRevenue($data);

 /* Now update the PIREP */
 $fields = array(
  'price' => $sched->price,
  'load' => $pirep->load,
  'gross' => $gross,
  'fuelprice' => $pirep->fuelprice,
  'fuelunitcost' => $pirep->fuelunitcost,
  'expenses' => $total_ex,
  'pilotpay' => $pilot->payrate,
  'revenue' => $revenue
 );

 if(isset($data['load']) && $data['load'] != '')
  $fields['load'] = $data['load'];

 return self::editPIREPFields($pirepid, $fields);
}

public static function getPIREPRevenue($data)
{
 $gross = $data['price'] * $data['load'];
 $pilotpay = $data['pilotpay'] * $data['flighttime'];

 if($data['expenses'] == '')
  $data['expenses'] = 0;

 $revenue = $gross - $data['expenses'] - $data['fuelprice'] - $pilotpay;

 return $revenue;

}

/**
 * Delete a flight report and all of its associated data
 */
public static function deletePIREP($pirepid)
{
 self::deleteFlightReport($pirepid);
}

public static function deleteFlightReport($pirepid)
{
 $pirepid = intval($pirepid);
 $pirep_details = self::getReportDetails($pirepid);

 $sql = 'DELETE FROM '. TABLE_PREFIX.'pireps
 WHERE pirepid='.$pirepid;

 DB::query($sql);

 # Delete any comments and fields
 $sql = 'DELETE FROM '. TABLE_PREFIX.'pirepcomments
 WHERE pirepid='.$pirepid;

 DB::query($sql);

 # Delete any custom field data
 $sql = 'DELETE FROM '. TABLE_PREFIX.'pirepvalues
 WHERE pirepid='.$pirepid;

 DB::query($sql);

 # Check if this was accepted report
 # If it was, remove it from that pilot's stats
 if($pirep_details->accepted == PIREP_ACCEPTED)
 {
  PilotData::UpdateFlightData($pirep_details->pilotid, ($pirep_details->flighttime) * -1, -1);
 }

 self::UpdatePIREPFeed();
}

public static function deleteAllRouteDetails()
{
 $sql = "UPDATE ".TABLE_PREFIX."pireps
   SET `route_details` = ''";

 $row = DB::get_row($sql);

 if(!$row)
 {
  return false;
 }

 return true;
}

public static function UpdatePIREPFeed()
{
 # Load PIREP into RSS feed
 $reports = PIREPData::findPIREPS(array(), 10);
 $rss = new RSSFeed('Latest Pilot Reports', SITE_URL, 'The latest pilot reports');

 # Empty the rss file if there are no pireps
 if(!$reports)
 {
  //file_put_contents(LIB_PATH.'/rss/latestpireps.rss', '');
  $reports = array();
  return;
 }

 foreach($reports as $report)
 {
  $rss->AddItem('Report #'.$report->pirepid.' - '.$report->depicao.' to '.$report->arricao,
   SITE_URL.'/admin/index.php?admin=viewpending','',
   'Filed by '.PilotData::getPilotCode($report->code, $report->pilotid)
   . " ($report->firstname $report->lastname)");
 }

 $rss->BuildFeed(LIB_PATH.'/rss/latestpireps.rss');
}


/**
 * Return true if a PIREP if under $age_hours old
 *
 * @param int $pirepid PIREP ID
 * @param int $age_hours The age in hours to see if a PIREP is under
 * @return bool True/false
 *
 */
public static function PIREPUnderAge($pirepid, $age_hours)
{
 $pirepid = intval($pirepid);

 $sql = "SELECT pirepid
   FROM ".TABLE_PREFIX."pireps
   WHERE DATE_SUB(CURDATE(), INTERVAL {$age_hours} HOUR) <= submitdate
 AND pirepid={$pirepid}";  $row = DB::get_row($sql);

 if(!$row)
 {
  return false;
 }

 return true;
}

/**
 * Append to a flight report's log
 */

public static function appendToLog($pirepid, $log)
{
 $sql = 'UPDATE '.TABLE_PREFIX.'pireps
 SET `log` = CONCAT(`log`, \''.$log.'\')
 WHERE `pirepid`='.$pirepid;

 $res = DB::query($sql);

 if(DB::errno() != 0)
  return false;

 return true; 
}

/**
 * Get all of the reports for a pilot. Pass the pilot id
 * The ID is their database ID number, not their airline ID number
 *
 * @deprecated Use findPIREPS() instead
 */
public static function getAllReportsForPilot($pilotid)
{
 return self::findPIREPS(array('p.pilotid'=>$pilotid));
}

/**
 * Change the status of a PIREP. For the status, use the
 * constants:
 * PIREP_PENDING, PIREP_ACCEPTED, PIREP_REJECTED,PIREP_INPROGRESS
 *
 * @deprecated Use editPIREPFields instead
 */
public static function ChangePIREPStatus($pirepid, $status)
{
 return self::editPIREPFields($pirepid, array('accepted' => $status));
}
/**
 * Add a comment to the flight report
 */
public static function addComment($pirepid, $pilotid, $comment)
{
 $comment = DB::escape($comment);
 $sql = "INSERT INTO ".TABLE_PREFIX."pirepcomments (`pirepid`, `pilotid`, `comment`, `postdate`)
 VALUES ($pirepid, $pilotid, '$comment', NOW())";  $res = DB::query($sql);

 if(DB::errno() != 0)
  return false;

 return true;
}


public static function getAllFields()
{
 return DB::get_results('SELECT * FROM '.TABLE_PREFIX.'pirepfields');
}

/**
 * Get all of the "cusom fields" for a pirep
 */
public static function getFieldData($pirepid)
{
 $sql = 'SELECT f.title, f.name, v.value
 FROM '.TABLE_PREFIX.'pirepfields f
 LEFT JOIN '.TABLE_PREFIX.'pirepvalues v
  ON f.fieldid=v.fieldid
   AND v.pirepid='.intval($pirepid);

 return DB::get_results($sql);
}

public static function getFieldInfo($id)
{
 $sql = 'SELECT * FROM '.TABLE_PREFIX.'pirepfields
 WHERE fieldid='.$id;

 return DB::get_row($sql);
}

public static function getFieldValue($fieldid, $pirepid)
{
 $sql = 'SELECT * FROM '.TABLE_PREFIX.'pirepvalues
 WHERE fieldid='.$fieldid.' AND pirepid='.$pirepid;

 $ret = DB::get_row($sql);
 return $ret->value;
}
/**
 * Add a custom field to be used in a PIREP
 */
public static function AddField($title, $type='', $values='')
{
 $fieldname = strtoupper(str_replace(' ', '_', $title));
 //$values = DB::escape($values);

 if($type == '')
  $type = 'text';

 $sql = "INSERT INTO " . TABLE_PREFIX ."pirepfields (title, name, type, options)
 VALUES ('$title', '$fieldname', '$type', '$values')";

 $res = DB::query($sql);

 if(DB::errno() != 0)
  return false;

 return true;
}

/**
 * Edit the field
 */
public static function EditField($id, $title, $type, $values='')
{
 $fieldname = strtoupper(str_replace(' ', '_', $title));

 $sql = "UPDATE ".TABLE_PREFIX."pirepfields
 SET title='$title',name='$fieldname', type='$type', options='$values'
 WHERE fieldid=$id";

 $res = DB::query($sql);

 if(DB::errno() != 0)
  return false;

 return true;
}

/**
 * Save PIREP fields
 */
public static function SaveFields($pirepid, $list)
{
 if(!is_array($list) || $pirepid == '')
  return false;

 $allfields = self::getAllFields();

 if(!$allfields) return true;

 foreach($allfields as $field)
 {
  // See if that value already exists
  $sql = 'SELECT id FROM '.TABLE_PREFIX.'pirepvalues
  WHERE fieldid='.$field->fieldid.' AND pirepid='.$pirepid;
  $res = DB::get_row($sql);
  $fieldname =str_replace(' ', '_', $field->name);
  $value = $list[$fieldname];

  if($res)
  {
   $sql = 'UPDATE '.TABLE_PREFIX."pirepvalues
   SET value='$value'
   WHERE fieldid=$field->fieldid
    AND pirepid=$pirepid";
  }
  else
  { 
   $sql = "INSERT INTO ".TABLE_PREFIX."pirepvalues
  (fieldid, pirepid, value)
  VALUES ($field->fieldid, $pirepid, '$value')";
  }

  DB::query($sql);
 }

 return true;
}

public static function DeleteField($id)
{
 $sql = 'DELETE FROM '.TABLE_PREFIX.'pirepfields WHERE fieldid='.$id;  $res = DB::query($sql);

 if(DB::errno() != 0)
  return false;

 return true;
 //TODO: delete all of the field values!
 //$sql = 'DELETE FROM '.TABLE_PREFIX.'
}
/**
 * Show the graph of the past week's reports. Outputs the
 * image unless $ret == true
 *
 * @deprecated
 */
public static function ShowReportCounts($ret=false)
{
 // Recent PIREP #'s
 $max = 0;
 $data = array();

 # Get the past 7 days
 $time_start = strtotime('-7 days');
 $time_end = date('Ymd');

 do {
  $count = PIREPData::getReportCount($time_start);
  $data[date('m/d', $time_start)] = $count;

  $time_start += SECONDS_PER_DAY;
  $check = date('Ymd', $time_start);
 } while ($check <= $time_end);

 return $data;
}
}

Wupperbengel · September 11, 2016

how can I fix it? MySQL5.5

Deprecated on line 52

------------------------------

45 case 'savesettings':

46 $this->edit_settings_post();

47 return;

48 break;

50 }

52 $this->set('allcriteria', PirepAcData::get_criteria());

53 $this->render('PirepAutoAccept/autopirep_criterialist.tpl');

54 $this->set('settings', PirepAcData::get_settings());

55 $this->render('PirepAutoAccept/autopirep_settings_mainform.tpl');

56 $this->render('PirepAutoAccept/footer.tpl');

58 }

60 public function addcriteria()

------------------------------

iÂ´ve found the solution:

Replace the code with the original with the () and then go into core/common/PIREPAcData.class.php and find this

public function get_criteria()

and replace it with

public static function get_criteria()

Edited September 11, 2016 by Wupperbengel

lapw123 · October 30, 2016

hello vangelis i just installed your module i can not get it work any suggestions ? , and yes i got the simbrif to work as well like i got it installed but it dont approve or reject any flights

Vangelis · October 31, 2016

can you post a link to a pirep , your criteria list , and your pirepdata.class.php

lapw123 · October 31, 2016

http://thaiairwaysvi...s/viewreport/12 pirep report edit this one i manualy approved

http://prntscr.com/d185xd criteria

PIREPData.class.php

Edited October 31, 2016 by lapw123

Vangelis · October 31, 2016

do you have a report with the criteria that you want ?

lapw123 · October 31, 2016

Well That is all setup for now i want to so evry flight for now higer than -500 feet in landing rate Will be rejected

Edited October 31, 2016 by lapw123

lapw123 · October 31, 2016

do you have a report with the criteria that you want ?

yes but like i said i just wanna do like when they get over 500 feet they get rejectet and when they got less than 500 at landing rate that it be auto approved

Melli · December 6, 2016

hi.

i importet the module...installed....and the installing was ok. no problems

all working fine...no errors...nothing, but it dont autoaccept and its not working. hmmmm??

here a screenshot from the last pirep (i overdraw the pilotsname)

and a screenshot from my admin panel:

PIREPData.class.php

Edited December 7, 2016 by Melli

Melli · December 7, 2016

nobody can help? pleeeease.....

Vangelis · December 7, 2016

As it is searching in the text part of the log can you please attach or link a full log of a pirep ?

Melli · December 8, 2016

xacars have no log entries (empty) and FS passengers pirep has this log:

but i want prefer xacars for working:

dirty testflight :-)

Log for F4B8

CompanyName=Limbus

nPilotName=F4B0001

nFlightId=F4B177

nOnlineNetworkNbr=0

nFlightDate=2016-12-06

nAircraftName=Boeing 737-800 Paint6

nAircraftType=MEJ

nNbrPassengers=118

nCargoWeight=0 lbs

nMtow=155499 lbs

nStartAircraftWeight=119863 lbs

nEndAircraftWeight=107307 lbs

nStartFuelQuantity=6685 kg

nEndFuelQuantity=753 kg

nDepartureIcaoName=LIRF - Fiumicino - Italy

nArrivalIcaoName=LEPA - Palma De Mallorca - Spain

nDepartureLocalHour=20:05

nArrivalLocalHour=21:37

nDepartureGmtHour=19:05:00

nArrivalGmtHour=20:37:00

nTotalBlockTime=01:31:22

nTotalBlockTimeNight=01:31:22

nTotalAirbornTime=01:22:12

nTotalTimeOnGround=00:11:22

nTotalDistance=454 Nm

nMaxAltitude=35016ft

nCruiseSpeed=446 kt

nCruiseMachSpeed=0.74

nCruiseTimeStartSec=981

nCruiseTimeStopSec=3901

nCruiseFuelStart=4803 kg

nCruiseFuelStop=1419 kg

nLandingSpeed=180 kt

nLandingPitch=3.77

nTouchDownVertSpeedFt=-614.61

nCaptainSentMayday=0

nCrashFlag=0

nFlightResult=Horrible

nMaxTimeAcceleration=1

nFsPassengersVersion=Dec 22 2008

nPassengersOpinion=77

nPassengersOpinionText=-Are pleased to have landed right on schedule.

n-Were cheerful because of the drinks served .

n-Were in a better mood because they had food.

n-Were angry because you made what seemed to be a dangerous landing.

n-Were very anxious because of the problem during flight.

n-Were relieved to land safely after an emergency.

n-Wonder if they landed or if they crashed (hard landing).

n

nFailureText=The flaps were extended at excessive airspeed and were damaged. The pilot landed roughly causing one tire to explode.

nCasualtiesText=

nPilotBonusText=You landed at the scheduled airport. (+30)

nPrecise arrival time at destination.(-00h01:23 difference) (+100)

n

nBonusPoints=130

nPilotPenalityText=You made a serious pilot error that resulted in a critical problem. (-800)

nLanding so roughly that a tire explode is not a good idea. (-300)

nYou had a serious failure aboard and you forgot to call a mayday. (-350)

nYou made a very hard landing at -614 ft/mn and the aircraft sustained damage. (-400)

nExceeding maximum speed of this aircraft is very dangerous. (-600)

nYou have exceeded the flap speed limit by 25.87kts (-258)

nAll aircraft are prohibited to exceed 250kts below 10000 ft AMSL; your speed was 54 kts above this limit Our company received a fine of $601. (-163)

n

nPenalityPoints=2870

nBitsPenalityDisabled=0

n

Auto Accept/Reject Pirep

Recommended Posts

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Vangelis

Vangelis

Vangelis

Posted Images

Join the conversation