Support
294 topics in this forum
-
- 22 replies
- 3.7k views
I need help to configure the email # EMAIL SETTINGS # Look at the available mail configs in config / mail.php # Also refer to the Laravel docs here: https://laravel.com/docs/8.x/mail MAIL_DRIVER = smtp MAIL_FROM_NAME = 'phpVMS DOES NOT RESPOND' MAIL_FROM_ADDRESS = 'MY MAIL GOES HERE' MAIL_HOST = 'here goes the host, but I don't know which one to put smtp.hostinger.es, imap.hostinger.es, hostinger.es' MAIL_PORT = '587' or '995' if outbound or inbound MAIL_ENCRYPTION = MAIL_USERNAME = my username MAIL_PASSWORD = my password I tried various convinations but none of them work for me. My service provider is hostinger.es imap.hostinger.es 993 …
Last reply by DisposableHero, -
- 17 replies
- 657 views
Hello, I did install PHPVMS 7 for a friend, which succeeded so far, yet the e-mail is not sending emails. I guess that I did something wrong. And I wonder if I got the right file to change. Which file do I need to change, so that PHPVMS can send mails to people etc. And how can I enter the smtp if there is a portnumber including SSL? I did look through the forums here, but I was not able to find my answer. Thanks anyway. aaRBee
Last reply by aarbee, -
- 4 replies
- 584 views
So, I'm not a complete noob at website building, but this has been a little difficult (3 days in the works) I've finally made it to the phpVMS is not installed page, but after clicking "Head on to the installer" I get a 404 error. it seems to be attempting to point to http://192.168.0.133/public/install (I'm currently setting this up in a VM which is why its pointing to said IP address) Am I missing something? currently using PHP v8.1 on a NGINX webserver inside Ubuntu 20.08
Last reply by lumpi86, -
- 1 reply
- 724 views
During the installation I get the following error message. Where is the error? Best regards Andreas
Last reply by DisposableHero, -
- 0 replies
- 555 views
When I am logged in, if I press the pilots menu, it shows the information of all the pilots and the IMAGE of the range, the load of this route: /public/assets/img/ranks/4.png If I select any pilot, it shows me the information, but it does not load the image of the Range. You want to load the image from this path: /profile/public/assets/img/ranks/6.png How to do so that the image is always loaded from: /public/assets/img/ranks/4.png
Last reply by jftejeiro, -
- 3 replies
- 639 views
Good morning everyone I tried to load a timetable I created in csv of 1200 routes, but after a few seconds the "500 server error" screen comes out and I only load 40 routes. can you help me? Thank you NB: to generate the file I tried with Excel and OpenOffice but no results
Last reply by DisposableHero, -
- 1 follower
- 1 reply
- 179 views
Php Version 7.0.0-dev+240407.8554a3 .csv files via VASchedules Database versions - MySQL Hi, I am having an issue with importing registrations via a .csv file. When I import the first picture bought from VASchedules into the fleet category I do not get my aircraft listed. (aircraft in subfleet menu is 0). I believe it is because it is missing the registration column. Therefore, I added a registration column and got the data from the downloaded phpsVMS3 .csv that also comes with VA Schedules. I copied and pasted this data as per the second picture hoping that it would then import them into the subfleets however no …
Last reply by DisposableHero, -
- 3 replies
- 163 views
I recently imported 4000 flights via admin/flights/imports. Only 3250 can be seen. What will cause the difference? What is the permiters or specifics that the import system uses to compare routes? Duplicate flights have been removed and all flights are marked as active prior to import on cvs exported from admin/flights/export. All flights are marked as visible. Thanks in advance for any assistance.
Last reply by DisposableHero, -
- 3 replies
- 518 views
In which files can I change the colors for the - weather WX, - icons (dashboard) - buttons dashboard - error massages I use the Disposable Theme and Disposable Basic. Thank you very much for your help And thats to this wonderful system. Greez Ben
Last reply by bb2901, -
- 3 replies
- 52 views
Greetings, We have imported our information from the older php v5 and now using the latest php v7. The pilots who once had admin roles from the previous version are still admins. The challenge is, we cannot seem to remove that role from the pilots. When we go to the user page, click user, edit the role (remove admin), when it saved, the role comes back. Can you shed some light on that please? Further, we are having some issues with the pagination. Pages 1,2 and 3 work fine, then page 4 isn't, then page 5, 6, 7 works, then another doesn't. The one that does not, gives the 500 | Server Error Another question. In the ACARS, sho…
Last reply by DisposableHero, -
- 1 follower
- 11 replies
- 2.4k views
Sorry, but I need help to install PHPVMS. 1. I Downloaded the file <phpvms-7.0.0-beta.3.zip> 2. I open a new free account at 000webhost (following a tutorial at Youtube - phpVMS Tutorials | Web Hosting) 3. I uploaded the files to folder public_html 4. I created a database 5. I chose PHP version 7.0 in the settings. 6. But, as I open my site, an error 500 shows up. 7. I dont have the possibility to install anything, as I could see in the PHPVMS page. I´m using a free account to test it, and posteriorly upload to my paid hoster. Anyone can help, please?
Last reply by macofallico, -
- 1 reply
- 449 views
I try to install the phpVMS 7 following the instructions, but when I try to open the subdomain created it returns the error below. Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator to inform them of the time this error occurred, and the actions you performed just before this error. More information about this error may be available in the server error log. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. I contact my host and the answer was that …
Last reply by DisposableHero, -
- 1 follower
- 1 reply
- 1.3k views
have install error. I dont undersutand it at ll. https://kurigashira.pet/image/phpvms_install_error.png
Last reply by Nabeel, -
- 3 replies
- 765 views
I'm having this issue when installing phpvms 7, could someone please help me, thanks
Last reply by DisposableHero, -
- 1 follower
- 2 replies
- 1.1k views
Didn't have any issues with Beta 1, but for whatever reason with Beta 2... When i go to click on the "head on to installer" I get Not Found The requested URL was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. It seems like it's not pointing to the right place, any suggestions to get it fixed. It seems to be pointing at /install Many Thanks
Last reply by Nabeel, -
- 0 replies
- 1.1k views
Hi, how do you change the install location of phpvms 7? It appears that every attempt to change the folder name or extract the folder to the root directory makes the page for the installer load up fine, but clicking on Install results in a file not found error. I have extracted to phpvms. Renamed the folder to crew. Then I have gone and changed the location in the config file. I visit the page. The installer page comes up. I click on install and I get a file not found error. If I install in phpvms and change the name after install (and the configuration to reflect the new location) the front page comes up fine. But clicking on any link results in a 404 erro…
Last reply by bbuske, -
- 1 follower
- 10 replies
- 1.4k views
Good evening, I have an issue. I downloaded the latest build of phpVMS on my Linux server. When I go to the URL, it starts the install process. I set the MySQL credentials, the connection test is successful. However when I click for the next step, it reloads the same page. Neither the database.php nor the database itself are impacted. Any clue? Thanks.
Last reply by Nabeel, -
- 5 replies
- 1.1k views
I don't know what I do wrong... I have a Linux Ubuntu Server with Plesk. I've added the the Domain in Plesk and I can upload files into "/var/www/vhosts/domain.com/httpdocs". I want to have a front page and phpvms on the url: "domain.com/crew". So I created in "/var/www/vhosts/domain.com/httpdocs" the folder "crew". In this folder I extracted phpvms 7 beta 4. I installed it a little bit different than in the manual because it was the only way to get it work. 1. I created the folder "phpvms". 2. In "/var/www/vhosts/domain.com/httpdocs/crew/phpvms" I downloaded the file and extracted it. On "https://domain.com/…
Last reply by Dougjuk, -
- 1 follower
- 6 replies
- 2.2k views
Hello, I am using shared hosting [ionos] and trying to install phpvms7. I downloaded the tar from github and uploaded to ftp public folder. when I go to my domain I get PHPvms not installed, head to install. I click on head to install but I get Internal Server Error. I am using php version 7.2 and here is my .htaccess file ( it is the same on root and public_html folder ) htaccess.zip
Last reply by Nabeel, -
- 1 follower
- 19 replies
- 2.9k views
Fatal error: require(): Failed opening required '/homepages/46/d848018555/htdocs/clients/phpvms7/bootstrap/../vendor/autoload.php' (include_path='.:/usr/lib/php7.2') in /homepages/46/d848018555/htdocs/clients/phpvms7/bootstrap/autoload.php on line 17 Getting this error whilst trying to get onto the installer ? Am running on php 7.2. Line 17 is - require __DIR__.'/../vendor/autoload.php'; Thanks On my other server I just get a blank screen nothing else
Last reply by DisposableHero, -
- 1 follower
- 14 replies
- 3.5k views
I have uploaded the directory to html_public folder and ran composer install. However, installation folder doesn't exists and therefore I am not able to continue installation. Has anyone had the same issue? Let me know if you know how to fix it!
Last reply by chris2012nrw, -
- 1 follower
- 3 replies
- 1.8k views
Hey I updated my php version to 7.1 and uploaded the files to my shared host and i got this error... Parse error: syntax error, unexpected 'class' (T_CLASS), expecting identifier (T_STRING) or variable (T_VARIABLE) or '{' or '$' in /home/thailicenseservi/public_html/JALVNG/index.php on line 16 Anyone know why? http://thailicenseservice.com/JALVNG/ is the link to the test site Thanks
Last reply by Nabeel, -
- 6 replies
- 1.1k views
Guys, I tried to install the latest beta version on a fresh new domain @ hostgator. It took them almost 2 hours to get the subdomain working but now I get the following error which seems to be version of php related? Symfony\Component\Debug\Exception\FatalErrorException Declaration of Symfony\Component\Translation\TranslatorInterface::setLocale($locale) must be compatible with Symfony\Contracts\Translation\LocaleAwareInterface::setLocale(string $locale) I am not a php guy so I am stuck. I see the version in my control panel is 7.3.6 Any ideas or suggestions will be appreciated. Thank you in advance.
Last reply by Dougjuk, -
- 2 replies
- 517 views
good morning, I'm trying to install the dev version of phpvms, but I can't open the phpvms setup. sorry for my English. kindly, is there anyone who can help me?
Last reply by kekko89sr, -
- 8 replies
- 949 views
First of all, I want to apologize because English is not my native language, so it is possible that I did not understand some of the solutions that already exists. We have been using the phpvms classic for a long time and we want to upgrade to the newer phpvms 7. My knowledge of php and hosting setup is as basic. I downloaded the dev version of the site from github, created a database with all the privileges, set the php version in cpanel to version 7, later I tried other newer versions php but I can't manage to start the installation. I tried to adjust VHost and still without success, I know I'm definitely missing something but I don't know what. We have li…
Last reply by IvanSt, -
- 1 follower
- 3 replies
- 1k views
If i type my Database things into the fields clicked "Test Database Credentials" then its says "Database connection looks good!" and if i click Setup Database then it loads and then the settings that I entered before are gone to the standard https://youtu.be/ql-a2UTrlic
Last reply by Christihahn, -
- 3 replies
- 831 views
Hi all, I have recently subscribed to an Ionos cloud server and have plesk to run as webhosting. I have set up a domain and a sundomain in which to run phpvms7. I get the following error attached. Any ideas where I could be going wrong. Many thanks in advance, Gary
Last reply by Dougjuk, -
- 2 followers
- 14 replies
- 4k views
one could lend me a hand on installing phpvms7 in a subdomain we are currently using VAM in our airline www.aerovirtual.com.ar, it`s working fine but its quite outdated. i want to keep using our main domain for our virtual airline and install phpvms in a subdomain. keep getting the internal server error or a corrupted index page. Thanks
Last reply by LuxuryCEO, -
- 1 follower
- 2 replies
- 592 views
hello all ive just tried to install phpvms 7 on our site buit it has come up saying that the INTEL PHP Exntention has Failed Does this mean that the Host am with hasnt got it enabled/Installed please help Regards Michael
Last reply by LuxuryCEO, -
- 1 reply
- 261 views
I have been chasing down a reason my emails stopped going out the door. When I first set up the website, emails from News postings went out. We weren't flying yet. Then after a few days, no emails going out. Checked Logs in storage/logs and I didn't find anything that looked like email failure, quite the opposite, it said it sent 11 emails. But there was a PDO error Here is the snips of the log when running it on PHP.8.2 [2023-12-13 00:10:11] production.ERROR: Class "PDO" not found {"exception":"[object] (Error(code: 0): Class \"PDO\" not found at /home/eastgyuv/phpvms/vendor/laravel/framework/src/Illuminate/Database/Connection.php:1718) [sta…
Last reply by DisposableHero,
